Why Should You Install a New Bath Tub Surround?

Many homeowners are being forced to deal with costly bathroom remodels for their aging bathrooms. The major expense is incurred with bathtubs and their surrounding tile walls which have historically been the wall coverings of choice in bathrooms across the country. Although tile was a durable choice for the time, over the years it has cracked, rusted, and lost its nice shiny look. Besides, some people are still living with the ghastly color schemes, like pink and green, that were popular back in the '50s.

Homeowners now have quick, easy, and less expensive options to removing old tile, grout, and caulking. They can now purchase bathtub surrounds and liners and just cover over the problems. Surrounds come in a number of different colors and finishes, so you're sure to find something that will add a positive look to your dcor. They are made from the durable plastics acrylic and PVC and receive rigorous testing to make sure they won't crack under impact. They are guaranteed not to stain, chip, or crack during normal use.

You'll find it easy cleaning your new bathtub surround. That old hard-to-clean grout will be history. It will have been replaced by a smooth finish that wipes clean in a jiffy. There are even automatic shower cleaners on the market that claim that a couple of sprays a day are all it takes to keep your tub looking clean and new.

Another reason people are opting for tub surrounds is that they are so easy to install. You will find that home improvement stores carry a variety of surrounds that you'll be able to install in just one day. You'll only have to remove the faucets in order to slide the surround right over the existing surface. Replace the faucets and seal the edges with caulk, then all you have to do is let the caulk cure, and your bathroom will have a whole new look.

Using these wonderful new products saves a great deal of hassle for homeowners. You no longer have to do without a bathroom or share one with others for days on end in order to do a remodel. Besides, a tub surround is a much more cost-effective way to eliminate the eyesore of old tiles, and the installation process is both quick and easy for most do-it-yourselfers.

Even if you consider yourself mechanically challenged, you can hire a professional to install a tub surround for you. A company rep will come to your house and take measurements before ordering your surround direct from the manufacturing facility. Although it will take a couple of weeks for your installer to receive your custom surround, the installation will be super quick. Whether you install a surround yourself or hire a professional to do it for you, you'll be happy at the difference the bathtub surround can make in the overall look of your bathroom.

Visit us for more information on Premier Bath Tubs and refinishing a bathtub.

Home Garage Books
Home Door Books

Basic Types of Bathtubs

Bath tubs are very common luxury in bathrooms. Taking warm bath in bath tub make you feel comfortable and relaxed. People all around the world install them in their bathrooms because of relaxation and other associated benefits. Due to high demands they are now available in various designs and materials that include traditional and modern designs as well. Traditional designs have antique and beautiful look. Now day's traditional designs are available with modern touch and pattern.

Types of Bath Tubs

There are seven basic types of bath tubs available in the market.

• Clawfoot Tubs
• Pedestal Tubs
• Drop-in Tubs
• Whirlpool Tubs
• Corner Tubs
• Recessed Tubs
• Hot Tub

Clawfoot Tub

Name indicates that tub has claw or ball shaped feet. It is one of the oldest design have antique look. Basic design consists of slanted back and straight front. These tubs are normally made up of cast iron, porcelain on steel or acrylic. They do not need any specific carpentry work. It is free standing tub with uncovered pipes. Wall mounted or floor mounted faucets can be used. It also has hole for over flow and drain. Some designs also have additional holes for faucets.

Pedestal Tubs

It is a kind of freestanding oval shaped tub without feet. Material used to make base of the tub is different from exterior surface but it is treated and processed to match with material of exterior surface. Some types do not have holes for faucets. Due to this tubs will have deeper water level. Some models also have hand showers for comfortable rinsing. Towel rail can also install on one or both ends of tub. These tubs are available in porcelain, cast iron and acrylic. It is necessary to check that material used is rust free.

Drop-in Tubs

They are designed to overcome the problems related to floor mounted bathtubs such as there is always a risk to get slipped when you are taking high step to come out from the tub. Drop-in bathtubs are mounted on deck in separate frame. This type is expensive to install. Material used to make tub are light weight fiber glass, acrylic and plastic. Some designs also have faucets but designs with out faucets are also available. In such design faucets can be mounted on walls. Commonly they are installed at the corner. They are perfect for sitting and soaking feet.

Whirlpool Tubs

These tubs offer relaxing hydro massage with controlled water circulation. They are also available in different installation design such as drop in or free standing tubs. Installation requires special framing, water heaters, electrical circuits and electronically controlled speed pumps with variable speed. These tubs are available in different materials that include cast iron, fiber glass and acrylic. They are available in broad range of colors, sizes and designs.

Corner Tubs

These tubs are normally triangular in shape have one finished and two unfinished sides. They are designed to save space. They can be of any shape but two sides are backed against wall. They don't have integrated showers. Drains are present in the middle or in one corner of tub. These tubs are also available in acrylic, cast iron, porcelain and fiber glass.

Recessed tubs

These tubs are very popular because of affordability and space efficiency. They have walls on three sides and only one side has decorative finish. They are available in number of different shapes such as square, round, rectangular, diamond and heart shape. Material used to make these tubs include cast iron, porcelain, fiber glass and acrylic. Some designs have integrated faucets and some do not. Hand held shower can installed for comfortable rinsing.

Hot Tub

These are huge tubs include water heater offers relaxing hydrotherapy. Tubs have jets present on both sides i.e. inside and out side. Electric or gas heater is used to heat the water. They also have pumps, pillows and grab rails. They are available in two configurations lounger and non -lounger. Electrical work must be performed with qualified electrician. Hot tub is expensive bathroom fixture and needs more maintenance as compared to other types. Cleaning and disinfection is very necessary to avoid microbial growth in bathtub.

If you further wants to know about the different issues related to bathtubs you can visit this site http://www.theyarelocal.com/articles/home_improvement_tips/bathroom/index.php it will provide you useful information about important issues of Bathtubs.

Z Bar Backing From 1 X 4

Slow Market Home Pricing Advice

Homes are going to be sold in good markets and bad. When times are good, people often forget that bad times will be coming eventually. During good times, people often get caught up in the hype of the real estate boom. During tough times, houses will be sold eventually, or taken off the market and sold later. If you need to sell the home as soon as possible, for financial or other reasons, you will have to adjust your price with the current market and don't get greedy.

This is the hardest thing for most people to do, lower the price of their home in order to sell it in a slow real estate market. Don't get caught up in the value of your home, six months or even a year ago. Last year's prices are not going to be this year's prices and you need to get that through your thick skull. If the average homes in your neighborhood are selling for $250,000 and you have a swimming pool or done some upgrades, maybe a room addition. Your home is going to be worth more than the average selling price.

Most real estate professionals will price your home according to the length of time you have to sell it. If you're in a hurry to sell, they don't have time to test the market. The price of your home would need to be competitive or lower than homes selling in the area. Whether homes are selling fast in a good market for selling slow in a bad market, if you have time, you can ask a little bit more for your home. If the market hasn't reached the bottom, waiting could actually hurt you, because the prices of the homes in the area would still be dropping.

Listen to your real estate professionals advice when pricing your home. That's what you're hiring them for, they are in the real estate business. Your neighbors, relatives, friends and people you work with, will probably be guessing if you asked for their opinion on pricing your house.

Your house is only worth what someone is willing to pay for it. Finding that person is the key to selling your home, finding that person as soon as possible could give you the illusion that you sold your home to cheap. Don't worry about it, your final objective is to sell the house.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

If you really think your home is safe, check out these pictures about home water damage.

Rubber Paint Over Shower Backing

How to Seal a Concrete Driveway - House Help

Sealing a concrete driveway is a simple, inexpensive and fast way to maintain the value of a home. Your concrete driveway is one of the first things people see when they drive up to your home. That is why it is a good idea to keep the concrete driveway looking as good as the day it was installed. Sealing the concrete driveway with a penetrating siloxane concrete sealer will give years of protection to the driveway. Another name for them is siloxane water repellent.

How Concrete Driveways Deteriorate

Water that penetrates and expands from freezing does most of the damage to concrete driveways. That is because the water expands 9% in volume when it freezes. This expansion can physically break the concrete bonds and cause it to flake, pit, spall and crack. Sealing the concrete reduces the amount of water absorption.

De-icing salts do damage to the concrete also. The salts attack the surface layer of concrete and the steel reinforcement inside the concrete. When de-icing salts are applied, the melted water can enter the concrete and then refreeze as the temperature drops.

Sealing the concrete with a penetrating siloxane sealer, also called a siloxane water repellent will reduce water and salt uptake and the number of freeze-thaw cycles the concrete goes through.

Penetrating Concrete Sealers

Concrete driveways are high traffic areas, with cars entering and leaving and kids using them for basketball courts. That is why your concrete driveway needs to have a penetrating sealer as opposed to a surface sealer.

A surface sealer is just that, it is applied to the surface and does not penetrate. The surface sealer will wear away rapidly from use. Every time a car pulls in or someone bounces a ball on it, a little bit of the sealer is removed. Some surface sealers can make the driveway slick and dangerous when it rains because the rough texture is covered up.

On the other hand, a siloxane sealer penetrates below the concrete surface. Siloxane sealers form a hydrophobic barrier against water and de-icing salt attack. They are commonly called siloxane water repellents. Because they are below the surface, they are protected from wear on the surface of the concrete. The natural texture of the concrete is maintained so traction and safety are not a concern. Finally, because the concrete sealer is below the surface, there is no shininess or gloss to the concrete.

Step 1. Let the Concrete Cure

Freshly poured concrete cannot be sealed. It must cure for 21-30 days prior to application of a penetrating sealer.

Step 2. Clean the Driveway

Broom off any loose debris such as dirt, mud and leaves off of the driveway. If there are any oil or grease stains, these should be removed to the best of your ability with a pressure washer.

Step 3. Allow the Concrete to Dry

Water-based siloxane sealers need to have the concrete dry for 24 hours prior to application. No rain should fall within this 24 hour time period. This will reduce the dilution of the siloxane sealer and ensure that the maximum amount gets into the concrete substrate itself.

Step 4. Spray, Roll or Brush on the Sealer

It doesn't really matter which method of application is used, but of course a roller is faster than a brush and a pump up garden sprayer is faster than a roller. No other special equipment is needed. You do not need to worry about getting it onto plants or grass. If any gets onto metal or windows, wash it off immediately with soapy water and a sponge.

Apply only enough concrete sealer that a slight whitish color is seen. Any ponding of material should be spread evenly prior to drying.

Step 5. Keep Rain and Traffic off of it for 24 hours

The sealer will dry in 1-4 hours but it is a good idea to keep cars and traffic off of the driveway for 24 hours. Application should occur when rain is not in the forecast for 24 hours after application to give the sealer plenty of time to penetrate and seal.

Once cured the siloxane sealer becomes a bonded component of the concrete driveway. A properly sealed concrete driveway will give years of protection from damage. The return on investment will be worth the time and expense of application.

This article is written by Aaron Kuertz who's with Applied Technologies. Aaron has been in the waterproofing industry since 1998. Applied Technologies is a manufacturer and supplier to professional waterproofing contractors and homeowners in the United States.

For more information about concrete siloxane water repellents, visit Applied Technologies.

Pipe Protector On 2 X 4

Putting Together Master Bedroom Bath Designs

One of the most popular remodeling projects involves putting together master bedroom bath designs. The master bath is an increasingly important part of your homes value, so it is generally a good investment of time and money to remodel and make improvements. You should not just jump in and start demolishing the old master bath, though. The first step (and a very important step) is to consider different options and draw up one or more designs of what you would like to do.
Several things are important to consider when putting together master bedroom bath designs. For instance, even a relatively small space can be redesigned so that it is more functional and feels more spacious. All you need to do is carefully plan and position the right components the right way. When planning the layout of your bathroom design think about how you move about the master bath and where each component should be located.
Master Bedroom Bath Designs
Color is also an important factor for your master bedroom bath designs. Different colors can create different effects depending on the rest of your dcor, the natural lighting and the electrical lighting in the space. As you are choosing a paint color for your bathroom bring color samples and sample materials into the bathroom space to see how they look in the ambient light.
Durability and cost are important parts of your design as well. Remodeling a master bath is a big job that you probably do not want to do very often, so select materials that are attractive as well as durable over the long term. Your budget is another important consideration. More and more manufacturers are offering extremely high end bath fixtures and components that are innovative but very expensive. Most of the time, if you splurge and spend a lot of money on these fancy items you will not recover those costs as fully in increased value of your home. It is generally better to choose mid range materials and items for master bedroom bath designs to gain the greatest return on your investment.

This article was written by Gregg Hicks of http://www.reliableremodeler.com which provides Internet-based home improvement information and services. Offering homeowners a simple, quick, and free way to access, qualified home improvement remodeling contractors.

Patio Books
Building Contractor Books

Advantages of Framing With Steel Studs

I have heard all sorts of stories over the years of the advantages in framing with steel versus wood studs. One time I even heard you could build an entire house with the amount of recycled steel from a large automobile such as a Cadillac. I find this hard to believe unless you're building a very small home.

My personal favorite for framing with steel studs is that they are extremely straight. I have built nonbearing partition walls using 12 foot 3 1/2 inch wide steel studs and after the drywall you can lay an 8 foot level to check it for straightness on the wall with amazing results.

If you use 3 1/2 inch wide steel studs with 5/8 of an inch drywall you will get an extremely durable and sturdy wall. Framing was steel studs is common in office renovations or remodeling. Most of the steel stud framing is done via the drywall contractors.

Steel studs and termites do not mix. You'll never have to worry about these little buggers or other uninvited house pests damaging your walls.

Over the years I have heard stories that steel framed buildings are earthquake and fire proof. They might be more resistant to fire than wood but keep in mind when metal is hot enough it will bend and warp making it unusable.

When I hear people talking about a fireproof building built with metal framing components my first thought is all of the other materials used in building the house that are not fire resistant. Don't get a false illusion when buying a house framed with steel studs and think it is 100% fire proof.

As far as steel framed buildings being earthquake proof this is another story. I really can't comment too much on earthquake damage to a steel building. The problem with earthquakes is they seem to create fires. So even if you're building does survive an earthquake it could get damaged by a fire in the area.

I have framed more wood homes than steel homes over the years and my steel stud construction is limited to nonbearing partition walls usually located in office buildings. I love framing with metal because of its light weight and ease of construction.

I still love framing with wood. There is something about what framing that I have always loved and always will.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as

well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Framing Ideas

Electrical Wire In Living Room

Ten Tips To Find And Hire The Best Contractor For Your Remodeling Project

One of the most frequently-asked questions on my forum is "How do I find the right contractor for my remodeling project?" There are many important steps and considerations in choosing and hiring a contractor for a remodeling project. There should be a lot of research and checking information before making a contractor choice.

Here are the top ten tips I offer to homeowners about finding and hiring the best contractor for a remodeling project.

1. Look for a contractor with a strong track record of success in your community. This person will have survived and thrived in the community. The business will be well established in the community, and people will know the contractor and his or her work.

2. Look for a contractor with knowledge and experience in the kind of work you want done. Experience is important. You need a contractor who has experience and knowledge of the specific kind of work you want done. For example, you don't want to hire a roofer to do an electrical job. When interviewing contractors for your project - ask them what projects they are working on now. They likely are doing several - if one or more is a project similar to yours, that's a good sign.

3. Check vital information on the contractor. Check with the state or local licensing board if contractors are required to be licensed in your area to ensure that the contractor is properly licensed to do the kind of work you need and that the license is current. Also check on the contractor's insurance. Ask contractors you are considering for the project to show you their insurance certification. Then call the insurance company and check to ensure the policy is current.

4. Check the contractor's record. Check with the Better Business Bureau, local courts, and search on the internet to find out if there have been any complaints or court cases involving the contractor. Also consider performing a background check. Many companies on the internet offer this service.

5. Develop a clear description of the project, including your workmanship expectations, materials and quality of materials before you discuss the project with a contractor. Your ability to be clear and specific allows the contractor to offer informed opinions and accurate estimates. It is also wise to be open about your budget from the outset, and if the cost is a major concern for you, ask the contractors you interview for their advice on how to minimize the cost.

6. Ask for and then check professional references. Ask for the contractor's standard references, and then ask for several references from projects that contractor is working on currently, as well as several references for projects the contractor completed recently that are very similar to yours. When you talk to the reference ask all the standard questions. Also ask what went wrong and how the contractor made it right.

7. Organize your project and the interview process. Make or buy an organizer to manage the business cards, literature, quotes, estimates and notes that you will accumulate during your search. A good organizer is The Complete Remodeling Workbook and Organizer. Use an interview script for both the contractor and references and a standard list of questions that you answer after the interview so you can compare contractors objectively.

8. Ask a lot of questions during the interview about the contractor, the project and the estimate. Not only do you need answers to specific questions, you need to evaluate your ability to communicate with the contractor. This is also an opportunity to decide whether you do or do not trust the contractor to be in your home and around your family.

9. Carefully compare and evaluate all estimates. I usually recommend that homeowners get at least 5 estimates. You will then need to compare the estimates, including all the details, in order to decide who to hire. Ensure that all of the estimates reflect the same workmanship, finished work, quality of materials, and schedule. If you are having difficulty comparing estimates, ask the contractor to help you make the comparison. If a contractor isn't helping you with this, then he/she probably is not the right one for you to work with.

10. Get a good contract. Get a contract that is based on the total final cost of the project (not an estimate). Be certain that everything is included in the contract. Sample contracts are available at http://www.remodelestimates.com If any changes from the details in the contract are made during the work process, ensure that all changes and costs are put in writing with a change order.

Dan Fritschen, the author of this article, is the founder of the websites http://www.remodelormove.com and http://www.remodelingorganizer.com He is the author of three books on home remodeling.

Tricky Ceiling Framing