Metal Siding Painting Advice

Painting metal and aluminum siding can become a nightmare if not done right. Over the years I have worked on and repaired many homes with metal siding. Metal siding is real common in mobile homes. Most older mobile homes use aluminum paneling for their exterior siding.

Most painted metal siding seems to last at least 20 years. The reason for this is the paint is baked on in a factory giving it a high quality and nice looking surface. This baked on method is used for painting aluminum and most metals siding that gives the product a long life.

I lived in a mobile home park for a few years and my next door neighbor's mobile home had never been painted and was over 45 years old. He would go out and washed the mobile home once a year with some TSP soap while using a brush on the end of an extension pole to clean the home.

His mobile home might not have looked brand new but it was definitely in great shape. Over the years he had developed a few scratches and some dirt that was hard to wash off but that was about the extent of the damage to the painted metal siding.

Well we painted our mobile home and used an expensive metal primer along with some expensive paint from Dunn Edwards & Co... This paint worked great. We lived there for around four years and never had any problems once the home was painted. Having been in the construction business I knew we had to use a good metal paint primer in order for the paint to stick to the baked on paint process for the metal siding to look good.

Here's my advice to you when painting metal siding.

1. Make sure the metal siding is clean. Use TSP soap along with a scrub brush and scrub that baby clean. The cleaner the metal surface the better the new paint primer will stick or adhere to the old paint.
2. Follow the instructions carefully on the paint primer can when applying the primer. Do not paint below or above the recommended paint temperatures.
3. Make sure you explain to the paint salesman at whatever store you're in that you are going to be painting metal siding. Get the right paint primer.
4. I would love to recommend a paint primer but cannot because I don't want to get a phone call from anyone a few years from now telling me the paint is peeling off of their home. Let that responsibility become the paint manufacturers.
5. Let the paint primer dry for the recommended time as per the directions on the paint primer can. I prefer letting the paint dry at least one week. The reason for this is some paint primer's stay soft for a while and if you paint over them immediately they doesn't seem to bond as good and sometimes will stay soft for a long period of time.
6. Apply your final coats of paint following the manufacturer's instructions on the paint can.

There you have it painting metal siding is all in the preparation of the surface you are painting.

Have fun painting and always read and follow the manufacturer's recommended instructions for the products you are using. These people test their products constantly and know the best way to apply them to any surface.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on different Types Of House Siding

Architects And Home Design
Repaired Roof Fascia Board

Handy Man Talents - Remodeling Tips

Do you pride your self as a competent handy man? Lets face it, there are many women who just love guys who can turn their hand to just about anything around the house. But it's not enough to be "just" a handy man, to be a well rounded in demand handy man you need to develop many different sets of skills.

Some people just like to do small handy jobs using timber, perhaps doing repairs to door jambs - window sashes & frames or repair a few rotten floorboards, and believe it or not the vast army of people working as handy men never seem to run out of work.

Perhaps instead of promoting your services as an all round handy man, you could specialise and concentrate your skills in certain areas, such as woodwork repair - fence repairs - household utensil repairs - garden furniture repairs - garden equipment & tool repair, there is an almost endless list that could be compiled in the general handy man arena.

But just imagine if you made a special effort and went a little further
than the average handy man does with his skills, and included special metal craft skills that placed you into a position that few other people were able to offer in your area, now wouldn't that give you a competitive advantage.

Tools - equipment & other things break all of the time around a house, the simple solution is to simply throw broken items out, and that is what most people do, and one of the major reasons why so much stuff ends up in landfill refuse dumps. Many of these broken items could easily be repaired and put back into service once more, people will save money and landfills will end up with a lot less material & things being dumped.

Metal repair skills are not difficult to learn, many trade colleges offer short courses on equipment - tool maintenance & repairs. If you are an enterprising handy man there's a good chance you already have the right kind of skills to succeed. You don't need a large inventory of tools either, a mid size electric arc welder, a sturdy bench fitted with a 4" vice, plus a hacksaw, a pedestal drill press and several other metal working tools and you are ready to go.

The piece De resistance of metal craft skills is when you have learnt and understand the art of metal casting, this is where you melt aluminium or bronze and pour the metal into a pre-made sand mould. Almost any shape can be made, castings made in the hobby workshop can range in weight from 1oz to several pounds or KG. All kinds of knobs, handles, levers, rods and flat shapes such as nameplates and plaques can be made with some practice.

There is an acute world wide shortage of people with practical skills and
know how to rebuild - repair and maintain, perhaps this is the kind of work that you would like to do either full time or part time. You only have to look in the newspaper classifieds to see that many people make a reasonable living rebuilding and repairing all manner of things.

Col Croucher

Need content? You may use this article at your website, or in your newsletter. The only requirement is inclusion of the following sentence - Article by Col Croucher of http://www.myhomefoundry.com - the definitive source for hobby metal casters of all ages. While at the web site you can download a free ebook to learn about, & understand hobby metal craft.

Four Tips to Help You Finance Your Bathroom Remodel

Financing any large remodeling project can be a pain, but when it comes to your bathroom, it can be an outright nightmare. But that doesn't have to be the case for you. When you learn about these four ways to help finance your bathroom remodeling project, you'll not only get to keep the bathroom vanity cabinets and vessel sinks that you've had your eye on, but you will also be able to add other stylish features that you never dreamed you could afford. While not all of these options will work for everyone, there's a perfect fit for you.

#1 Save your pennies

While many people might consider this to be the hardest way to finance your bathroom vanity cabinets, it's also a good way to prioritize the things that you want to add to your bathroom. By taking the time to put away money each month for six months, you will be able to buy your bathroom remodeling pieces outright instead of paying them off for years to come. Try putting as much as you can away into a savings or money market account that will give you a high interest rate. This will accumulate as you're saving, giving you even more money at the end of your planned savings time. Start by looking at how much money you have at the current time, deciding how much you will need, and then start saving!

#2 Finance your project

For those with good credit, you may be able to say 'yes' to vessel bathroom sinks immediately by opening up a store line of credit at your local bathroom supply store. Look for deals that include no interest for a specific period of time and then be sure to pay off the full amount within that time period. This will help you get everything you need at the same time, but allow you some grace time to pay it back off. The trick with getting credit is that you only want to get as much as you need so that you're not paying off this debt for the rest of your natural life.

#3 Make a trade

If you know someone in the bathroom remodeling business, you might be able to trade skills for a bathroom remodel. For example, if you're a carpenter, you might be able to help a bathroom contractor out with another project, free of charge in exchange for work on your own project. You might also have friends that can help you out and then you can pay them pack later or make other arrangements so that you can install your vessel bathroom sinks or vanity cabinets. You might also find the supplies you need at a swap meet or flea market.

#4 Shop around

You'd be surprised how many vessel sinks and bathroom vanity cabinets you can find for a steal on the internet. By shopping around, you may be able to find the right fixtures and accessories for your bathroom and then hire on a friend to help you install them - saving you labor costs. You might also try to install your own fixtures and other bathroom projects to save yourself even more money and give you a sense of accomplishment.

Financing your bathroom remodeling project isn't about taking out a large loan and hoping that you don't need more. Budgeting and financing should be something that takes creativity and some discipline. You need to make money available or use your money more wisely to finance your project - plain and simple. Where you cut those corners is up to you.

For all the things you need to make your bathroom shine, go to http://www.discountbathroomvanities.com

Dave Robert is a VP at Discount Bathroom Vanities Publishing, and an avid fixer-upper who's been restoring old houses for more than twenty years. Readers can tap into Dave's knowledge about home remodeling, and kitchen and bathroom design, at: http://www.DiscountBathroomVanities.com

Tract Houses Framing Problems

The house you live in was probably a mass produced home built as part of a housing track. The track home is a rapidly built house in phases. These phases if possible will over lap the other home building trades. If possible you will have the plumbers working on the same house as the electricians and the framers. This is called fast tracking.

Fast tracking a house is building a home as fast as humanly possible. So you can imagine the pressures put on all of the people involved in building a track home.
The pace is so fast sometimes that I have seen job superintendents and foremen look like they were actually going to blow up. I mean explode from the pressure they where under.

Framing the stairs on the job was the same experience for me most of the time. Sometimes I had three jobs going at once. Think about it. At the most, I could only go to each of the jobs twice each week. That involved working on Saturday of course. This made a lot of framing foremen extremely upset. They had full time crews on their jobs always working five days a week. If I missed one day of work. I was behind for the rest of the job.

Now it rarely happened but if I did miss a day of work I had to make it up some how. The only way to make it up was by working late or on Sunday. Well most of the time I worked six days a week from 7:00 in the mourning until 5:00 at night. So working late meant sunrise to sunset. Oh did I mention that I did have a family. This wasn't easy for them either.

One time I got so far behind on a job that I was putting stairs in while they were roofing the houses. Talk about one unhappy foreman. I think you get the idea about the pressure I was under to install these stairs on time. My experience building stairs on track built homes taught me to build homes extremely fast while being proficient.
I'm not interested in working like that anymore. My life is simple now and I want to keep it that way. The next time you see a construction worker working late on a Saturday show some compassion. Maybe by reading this article you will understand some of the pressure he is under.

Building tract homes is hard on you mentally and physically.

Happy Home building.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stairway Safety

Gum On Brick Stairs

Repairing a Leaking Toilet - Home Repairs

Let me explain how a toilet works. First when you go to flush the toilet a little arm pulls a rubber flapper up and lets the water drain into the toilet bowl. The water draining into the toilet bowl forces the old water out along with the number two or number one waste and extremities.

If the toilet sounds like it is running there is a good chance that the seal between the rubber flapper and the plastic rain at the bottom of the toilet is broken somehow. The sound you are hearing is water running around this ring and in to the toilet bowl.

This leak is actually causing no damage to the toilet itself but is wasting water. Hence the water bill will be a little higher if you don't fix the leaking toilet. The best way to find out if this is actually your problem is to take the toilet tank lid off. Then stick your hand down into the toilet bowl and press gently on the rubber flap.

If the water stops leaking or starts running faster this is your problem. Turn the water off to the toilet. There will be a shut off valve on the wall under your toilet bowl in the bathroom. After you turn the water off removed the plastic flap and examine it.

You will be looking for a warped toilet flap or of some sort or grooves on the flapper itself. Take the toilet flapper down to your local home improvement store and buy a new one. Go home and replace the new toilet flapper and this should solve 90% of your leaking toilet problems.

There is one more thing it could be. With the toilet tank lid off, check to see if water is overflowing into the little round plastic pipe. This plastic pipe should have a small hose running from the float valve assembly into it.

If the water is over flowing from the toilet tank into this little plastic pipe you will need to adjust the float.

First thing you will need to do is while the toilet is running lift up on the float lever arm. If the water stops you can simply bend the metal arm of the float lever. The purpose of bending the arm will force the float deeper into the water there for stopping the water from rising over the small tube in the center of your toilet.

There are few parts to a toilet and most parts can be purchased at your local hardware or home improvement centers. Toilet repairs like this can be made simple and the parts used to replace are inexpensive.

Happy Toilet Repairing.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more House Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Some Great Plumbing Ideas

Remove And Replacewindows

Finding the Right Types of Paint For Your Home

It is no secret that repainting your home can be a big undertaking. First you have to decide whether you will complete the project on your own or hire a contracted painter to complete the job. Then you have to decide what color you want to use in the painting project and how much the entire project will cost you. However, in the end, nothing can freshen up the look of your home and create jealous neighbors quite like a new paint job.

If you are thinking of having your home repainted, you might be thinking of finding the right types of paint for your home. This can be a very big task if you are going to attempt the painting project on your own, because there are many things to consider when deciding on a type of paint. You will have to think about what brand you want to purchase, how much you want to spend on the paint, and which type is the right one and will last the longest. When you go to the store to buy the paint for this project, there will hopefully be assistants there that will help you with all of these paint questions. Probably one of the biggest decisions if you are going to paint your home by yourself is how much you are willing to spend on the paint. You will probably want to use the highest quality paint that you can afford for this project because it will not only last longer, but will do a better job of protecting your home than other low cost paints.

The benefit of hiring a contracted painter for your painting project versus trying to complete it by yourself is that you will not have to worry about finding the right types of paint for your home. A professional painter should be trained in the correct types of paint to use for your painting project and will be able to choose the one that will work best on your home. Therefore, really one of the only decisions that you will have to make is what color you would like to have the house painted, which can be a big enough decision in itself.

When deciding whether to complete the project on your own or hire a contracted painter, you might just want to schedule meetings with a few painters to discuss how they would complete the project to get a feel for which decision is best for you.

There are many things to think about when it comes time to have your house repainted. If you decide to complete the project on your own, you will have to make many decisions regarding finding the right types of paint for your home. If you hire a contracted painter on the other hand, they will already known which types of paint will last the longest on your home and will help protect your home the best. Either way, hopefully when your painting project is completed, you will be able to take some time to relax and enjoy the fresh look that the new paint job has given your home.

Justin recommends contacting
College Works Painting a long established and professional company for more information on the correct paint used for exteriors or to simply schedule a painting job with College Works visit them online today.

Finding the Right Types of Paint For Your Home

It is no secret that repainting your home can be a big undertaking. First you have to decide whether you will complete the project on your own or hire a contracted painter to complete the job. Then you have to decide what color you want to use in the painting project and how much the entire project will cost you. However, in the end, nothing can freshen up the look of your home and create jealous neighbors quite like a new paint job.

If you are thinking of having your home repainted, you might be thinking of finding the right types of paint for your home. This can be a very big task if you are going to attempt the painting project on your own, because there are many things to consider when deciding on a type of paint. You will have to think about what brand you want to purchase, how much you want to spend on the paint, and which type is the right one and will last the longest. When you go to the store to buy the paint for this project, there will hopefully be assistants there that will help you with all of these paint questions. Probably one of the biggest decisions if you are going to paint your home by yourself is how much you are willing to spend on the paint. You will probably want to use the highest quality paint that you can afford for this project because it will not only last longer, but will do a better job of protecting your home than other low cost paints.

The benefit of hiring a contracted painter for your painting project versus trying to complete it by yourself is that you will not have to worry about finding the right types of paint for your home. A professional painter should be trained in the correct types of paint to use for your painting project and will be able to choose the one that will work best on your home. Therefore, really one of the only decisions that you will have to make is what color you would like to have the house painted, which can be a big enough decision in itself.

When deciding whether to complete the project on your own or hire a contracted painter, you might just want to schedule meetings with a few painters to discuss how they would complete the project to get a feel for which decision is best for you.

There are many things to think about when it comes time to have your house repainted. If you decide to complete the project on your own, you will have to make many decisions regarding finding the right types of paint for your home. If you hire a contracted painter on the other hand, they will already known which types of paint will last the longest on your home and will help protect your home the best. Either way, hopefully when your painting project is completed, you will be able to take some time to relax and enjoy the fresh look that the new paint job has given your home.

Justin recommends contacting
College Works Painting a long established and professional company for more information on the correct paint used for exteriors or to simply schedule a painting job with College Works visit them online today.

DIY Bathroom Remodeling - Home Remodels

The first question you need to ask yourself when remodeling a bathroom is can you actually do the work yourself or do you have someone that can help you with the remodeling. If you don't know anyone and can't do the work yourself, I would suggest hiring a contractor with experience remodeling bathrooms.

If you can do the work yourself or think you could do the work yourself, why not give it a shot. Any experience you have in construction or home remodeling, is going to be beneficial to your bathroom remodeling project. There is plenty of information on the internet or in your local libraries on bathroom remodeling and these often prove to be great resources for do it yourselfers.

As an experienced contractor I have gathered a great deal of information through books, at work and watching local home improvement shows. The biggest problem with the show's and quite a few of these books, is they don't provide enough information. Most of the time they provide you with the basics of bathroom remodeling and you could soon find yourself in trouble or seeking the advice from a home improvement professional.

The largest benefit for doing the bathroom remodeling project yourself, could be the money you save, along with the satisfaction of completing the project. It makes homeowners feel good when they've completed a large home remodeling project, like a bathroom remodel.

If you don't have the time, lack the experience or a combination of both, I would suggest hiring a contractor to relieve you from the stress and frustration of your bath remodeling project. The more complex your bathroom remodeling project is, the greater the degree of difficulty, the longer it will take to complete the project. Some of these projects can take up a lot of your time.

If you're working on galvanized water supply pipes or old cast iron waste pipes, you could find yourself hiring a plumber to install your bathtub and fixtures. These old pipes create problems for most do it yourselfers and I would suggest hiring a professional, whenever you run into a problem you don't feel comfortable with.

Choosing to tackle some of these difficult problems yourself, could lead to water leaks and more damage to the home eventually costing you even more money than the original cost of hiring an experienced plumber in the first place. When it comes to water, structural framing and electricity, think twice, especially if you're not experienced in these areas.

My advice to do it yourselfers is to hire a professional if you're not comfortable or seek the advice from a contractor or someone with considerable experience bathroom remodeling.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more House Remodeling Pictures or home building ideas.

Water Heater Vent Through Plywood

Pebble Tile Shower Floor

A Pebble Tile Shower Floor enables you to redecorate your home by using the same techniques and style used by the Greeks and the Romans. If you look for a quick way to redecorate any surface at home, you should try these natural stone panels. If you are interested about Easy do-it-yourself tiling techniques - read the following article.

Short overview

A Pebble Tile Shower Floor is about gathering the same small flat stones that are manually and carefully attached onto a mesh backing of 12" by 12" size. The seashores of S. East Asia are rich with these flat pebbles, and indeed most of these tiles are originated from that part of the world. It seems like no other tiling technique enables you to redecorate practically anywhere inside and outside your house: Bathroom flooring and wall coating (including showers), kitchen surfaces such as countertops & backsplashes, patios, pools and even fireplaces.

Main advantages

Using this simple tiling solution definitely brings various redecoration advantages:

* Durable to most common home detergents.

* Considered inexpensive compared to other tiling solutions.

* Installation process is quick and takes only a few hours.

Useful tips!

* Upon completion, it is important to wait the adhesive's recommended drying time before you begin on grouting.

* Use a tile saw in order to cut stones to fit edges or corners.

* Make sure the surface you are about to tile is flat, clean, dry and free of contaminants.

Conclusion

Pebble Tile Shower Floor remodeling is highly effective for any home-maker as it requires minimal effort, knowledge, and resources. We could easily find many other benefits provided by this fun & easy remodeling option, simply because any average and unprofessional home-maker can do it easily by him/herself. If you wish to succeed with your first installation it is recommended to use the following tips & advices just as you decide on using these natural panels.

Get creative! - Learn more about how you can easily decorate your bathroom with Pebble Tile Shower Floor.

Building Safe Stairs in Vista California

As a general rule of thumb in stair building the sum of the tread and riser should equal around 17 1/2 inches. This is a general rule of thumb for a comfortable, easy to walk up and down set of stairs.

For example if your stair tread is 10 inches and the stair riser is 7 1/2 inches you have a comfortable stairway. Walking up and down a stairway using this formula creates a comfortable set of stairs. The next time you walk down any uncomfortable set of stairs measure the stair tread and riser. You will be amazed at what you'll find.

For public stairs or heavily used stairs this method will become one of your best friends. On public stairs you have liability issues and of course lawyer issues if you are the owner of the building. If you are not building a safe set of stairs that meets your local building codes standards you could be in for a whopping financial nightmare.

Building safe stairs as a contractor is your obligation to society. I don't know how many times I come across a loose stair tread or a broken hand rail. One of the biggest problems I find is in the poorer neighborhoods you come across some major construction problems and safety hazards. I never have been able to figure out why a building owner would not want to protect himself financially and the people that occupy and use his buildings safety.

Here's something you need to avoid when using the stair building general rule of thumb. This rule of thumb does not apply to good to an 8 inch tread with a 9 1/2 inch stair rise. You don't want to be building a latter you want to be building a safe set up stairs.

The maximum stair rise you can use for most building codes is 8 inches. You will not find the stairway to comfortable with a 9 1/2 inch stair tread and an 8 inch riser. If you have no choice and are cramped for space and you can't redesign this stairway to fit in the house or building then at least make sure you have a nice sturdy grip able stair hand rail.

This formula works great when you are working with exterior landscaping and you have a long run of stairs with a small rise. For example: if you have a 14 inch stair tread and you use a 4 inch riser this will lead to a comfortable step.

Look for stairs in your neighborhood or around some apartment complexes that don't follow these rules and have 16 inch stair treads with 7 inch risers. You will find yourself taking two steps on the stair tread on every other step and it is not a real comfortable stairway.

Happy stair building and keep this formula in mind for a nice comfortable set of stairs in your building future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Walkways Books

Bathroom Moisture Problems - Home Remodeling

Right above my bathtub in my master bathroom the paint is peeling off the wall. The area is peeling above the tile in my bathtub and shower combination. I tried to glue the peeling paint back and only made the situation worst.

First things first. The paint is peeling because there is to much moisture in the bathroom while you are using it. Do you have any windows you can open or a ventilating bathroom fan. If you have a window crack it open part way while you are showering.

The water droplets will accumulate on the walls and drip into any cracks. Right above the tile grout is a great place for moisture to accumulate. Oh yeah moisture loves grout and drywall. If you have any unpainted areas or an area that has cracked. Guess what you have now.

Your paint is peeling because the bathroom gets hot and cold. Moist and dry. If you have the door and windows shut. You just created a moisture trap. Most people prefer their privacy and will closes the door when using the shower. Well then open the window and let some cold air in while you are taking a nice warn shower. I don't think so. Most showering fools don't like that idea either.

Ok one more idea keep the windows shut so you don't let the cold air in. Then lock the door so no on barges in on you. If you have a ventilation fan turn it on. This will at least pull fresh air in from under the door and send the moist air out of the house.

But the fan is so noisy and I can't enjoy my nice warm vapor producing shower that will eventually cause me to get sick from mold particles floating around in the air while I am using my bathroom.
Does this about sum it up for you and don't we all do this from time to time. We want to enjoy our shower time, so we close up everything and when we are in our bath sauna environment relaxing our house is getting some damaging moisture that could cause mold and mildew.

Open a window or door a little when you shower. Get some air circulating through the bathroom and prevent damage to your nice house.

Put up with a little inconvenience for you homes sake and your pocket book.

Greg Vanden Berge has been in the home building and remodeling business in California for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.

His website provides all kinds of answers to remodeling and new house building in North San Diego Home Remodeling Carlsbad Home Remodeling

Visit us now for Bathroom Ideas

Carpentry

Dual Pane Window Glass Repair

For the past few weeks, I have been explaining how to repair a broken window pane in your home. But, what if you have dual pane windows? Is the process the same? Well, pretty much, except for a couple of variations. So, let's review the single pane repair process, and I will point out the differences regarding dual pane windows.

When we start talking about dual pane windows, one of the first things that comes to mind is vinyl window frames instead of aluminum. When dealing with dual pane windows, you can have either aluminum or vinyl frames, depending on the year the house was built. Dual pane glass got popular in the 1980's, but vinyl frames didn't really catch on until the 1990's. So, if your house is less than 10 years old, chances are you have vinyl framed windows. In either case, I will discuss the differences. Let's say you have a sliding aluminum frame window with dual pane glass. The procedure for removing the frame from the opening and the glass from the sash is the same as with the single pane windows.

The differences are, first, the glass goes into the frame about twice as far as the single pane window. The single pane window glass went 1/4" into the surrounding rubber. The dual pane usually goes 1/2" into the rubber. So, if both pieces of glass have been broken, you are going to have to order a new IGU (Insulated Glass Unit) from the local glass shop. They are going to want to know the width, height, overall thickness, and possibly the individual glass thickness. The best way to get the dimensions is to measure the width and height from rubber to rubber, write those numbers down. Then, remove the panel from the opening and place it on a table like we did with the single pane window. Remove the screws from opposite corners and pull of the frame. You will be able to see how far the glass goes into the surrounding rubber. If it's 1/2", then you want to add 1" to the width and height that you measured previously (1/2" times two sides= 1"). Then, measure the overall thickness of the unit by removing the rubber from the glass edge.

Typically, this dimension is 1/2", but not always. There is a metal spacer that divides the two panes of glass. Make a note of the color so you can request the same color in the new IGU. It's either going to be silver or bronze. If you want to get the same size spacer you need to give the glass shop the thickness of each piece of glass in the IGU. If the old unit has 1/8" glass on both sides, and the overall thickness of the unit is 1/2", then they will use a 1/4" spacer. If the glass is 3/32" on both sides, they will use a 5/16" spacer. If you don't care about matching the spacer thickness, you can request the thicker 1/8" glass, and they will automatically use a 1/4" spacer.

When you get the new IGU home, the installation is the same as the single pane window. Now, what if only one side of the IGU has been broken? Many times the outer pane will break, but the inside pane is fine. You can order a whole new IGU Like we just did, or, if you're the adventurous type, you can order only the single pane of glass that was broken and replace it. I'm going to explain how to do it, then i'm going to tell you the things that can go wrong. After you have the window pane on the table with the surrounding frame removed, you will see a black rubber type substance around the edge where the spacer is applied. This is a butyl sealant, and you have to separate the broken glass from this butyl. The best way to do it is to take a utility knife with a new blade and break through the butyl where it meets the broken glass. Then, take a new hacksaw blade, and push it into the area where you sparated the butyl from the glass. You don't want the hacksaw blade to be attached to a hacksaw. Using your hand, saw back and forth as you work your way around the edge of the glass. This should allow you to remove the glass.

Once that's done, lay rags on top of the good piece of glass to catch any debris, and scrape the surface of the spacer that will be contacting the new glass. Use a putty knife. Then, remove the rags and debris. When you are ready to put the new glass on, clean the inside of the good piece of glass that you didn't remove. Remember, once you install the new glass, any debris or finger marks on the inside will be permanently sealed. So, clean it real good and check it from all angles. Do the same to the side of the new glass that will be going to the inside of the IGU. Then, run a thin bead of clear silicone around the entire perimeter of the spacer. Set your new glass on the spacer and use finger pressure to adhere the glass to the silicone all the way around.Then, come in from the side, and run silicone around the side where the glass and spacer meet. Cover the window opening with something for 24 hours. You do not want to touch the IGU for 24 hours. The silicone needs to cure. After 24 hours, you can assemble the unit and install it back into the opening.

There are a couple of things that can go wrong. The first one is leaving marks on the inside portion of the glass. Once you seal the glass, you cannot clean what's between the panes. The other thing involves condensation between the panes. If you have even the slightest break in the silicone seal around the glass, chances are you will beging to see moisture form as soon as the nights get cold and the days get warm. You are going to have to decide if you are confident enough in your ability to do the job right, or if it's better to pay the extra money to have it done for you. Just because you pay someone to do it, doesn't mean you still won't encounter the same problems. The difference is, they have to guarantee their IGU for a minimum of 1 year. I have received many units over the years that had marks in between the glass. The beauty of it is the manufacturer can't dispute it, because there's no way anyone else could have done it except them.

OK, what if the window frames are vinyl instead of aluminum? Well, the main difference is the glass in a vinyl window no longer has the rubber gasket around the edge. You dont remove the opposite corner screws and separate the frame from the glass. What they do is put either silicone or a two sided tape on the lip of the frame where the glass rests. That's what holds the glass in the frame, then they apply a snap in stop on all four sides of the glass. So, you have to remove the stops first, then turn over the panel and break the seal holding the glass to the frame using a utility knife. Wear gloves during this procedure. If only one side of the IGU is broken, don't even think about repairing just the one side. You will never get that IGU out of the frame without breaking the other piece of glass in the process. But, on the positive side, you can remove the stops without taking the panel out if it's a slider. You can then measure the dimensions of the glass, and order the new IGU. That way you eliminate any need to temporarily cover up your window. The same is true for the stationary portion of a slider, or a picture window. Before you install the new IGU, be sure and clean the lip that had the tape or silicone, and apply either silicone or tape. Either will work.

You will discover that replacing an IGU in an aluminum frame window is a whole lot easier than a vinyl window. But, in either case, you can do it yourself and save a few bucks.

John Rocco has been installing replacement windows since 1978. To learn more, visit How To Install Windows

Healthy Humidity - Home Tips

During fall or winter, there are only two words to describe the weather - cold and dry. If you've ever experienced going through the entire season before, you'll agree that the conditions are neither healthy nor comfortable. Your lips get dry, your skin gets flaky and you have to nearly drown yourself in lotion and moisturizer. There's an easy way to make dry conditions more comfortable for you and your household - with a humidifier.

What's a Humidifier?

It's basically a small household appliance that balances the humidity in the air by releasing moisture in the form of water vapor. The smallest portable humidifiers typically use a wick mechanism where there's an absorbent material soaked in water which releases the moisture into the surrounding air to achieve equilibrium. There are also larger units for the whole house, humidifiers that can manage your whole house.

Different Kinds of Humidifiers

Aside from the usual wick-type room humidifiers, you'll also find ultrasonic, cool mist and warm mist humidifiers widely available on the market today. Each type has its own advantages and disadvantages that you may want to consider if you're planning to buy a unit for your home.

Cool mist and ultrasonic humidifiers work similarly in that they both 'throw' water into the air to increase humidity. A rotating disk flings water at a diffuse in a cool mist dehumidifier to disperse the water molecules into the air. Ultrasonic dehumidifiers use a metal diaphragm that vibrates rapidly to shake the water droplets up into finer particles and create a cool fog.

Vaporizer or warm mist humidifiers, on the other hand, have a reservoir of water. The water is gradually boiled to create steam which is then released into the air. Warm mist humidifiers are generally seen as the 'healthier' option because, unlike ultrasonic and cool mist humidifiers, they don't just release water into the air. The boiling process gets rid of the microorganisms and foreign particles that might be present in the water.

The Health of Benefits from Humidifiers

Although comfort is the most obvious advantage of a humidifier, you're actually getting a lot of health benefits along with it. Your body wasn't designed to thrive in dry environments, and your skin reacts negatively to conditions that aren't humid enough. Better, younger-looking skin is the first thing you'll notice after you install a humidifier in your home.

Dust particles are likelier to float around and circulate when conditions are dry. That means it's easier for the dust particles to get inhaled or to stick to skin where they could trigger dangerous allergic reactions. When there's an ample amount of moisture in the air, dust particles tend to get bogged down and safely clump from the floor where they can't cause allergies.

Add all that to the less static electricity and the better indoor conditions in your home. With all those benefits, it's undeniable that a humidifier will definitely be a good investment for your home. Whether you're getting the smallest room humidifier or an extra-large whole house humidifier, it's a purchase that your whole household will be thankful for.

Herman White is an expert author who writes on various topics. He is constantly involved in writing valuable and informative articles with an interesting pitch that makes readers know more about the things. Keep an eye or scribe to read more from Herman White.

Home Improvement Ideas

Prepare For New Trends in Bamboo Shades

As the growth of any product increases, there will be a deepening of the available options out there. Often, the newer choices will be the best. Imagine the time when the re were only a few choices of personal computers. Later, even now, there are so many options. Given this inevitable flow of new options for products, one should not be surprised that there are so many new choices of window treatments available. In addition to the wide range of product choices, there is a deep and wide range of style and design with each category. This article will focus on the options available for bamboo shades. The old style of sticks interlaced with threads, which may have had only a few color choices, but not many design options, is the past. Now, perhaps due in part to enhanced production methods, as well as a desire to match almost every design plan, has led to a time which may well be the renaissance of bamboo shades.

The new trends in bamboo shades have included a movement towards the unconventional. Traditional American consumers have gone for basic white in window treatments. While there have always been sales of white bamboo shades, woven woods consumers have usually trended more toward the unique patterns. This will include different types of slat materials as well as new weaving and interlacing of threads.

Basic stick design has been replaced by more bamboo looking materials. The bamboo shades which use tortoise shell patterns are now increasingly common. These bamboo shades sometimes are colored differently, including black or red, which makes for a different type of color splash compared to the traditional greenish brown colors. Other designs use different sections of the split bamboo as the base. Much of this material was considered not attractive enough for bamboo shades, but now, with new production techniques, as well as the other new trends discussed in this article, these former scrap discards are being used in a productive way.

While the basic brown, beige, or white threads are still available, the trends here are towards more durable threads, which will last longer under strong exposure to the sun light. Bamboo shades also use newer colors, including green, red, and chocolate, and this range can allow for a design that may have looked commonplace to now look rich and new. This slight change is usually not noticeable as to the cause, but upon close examination of the threads, one will notice that a simple difference in color is the cause of the style enhancement for the bamboo shades.

The third most common way in which bamboo shades patterns are evolving is a new style of weaving the threads. The traditional shades had a simple drop in the threads, with a weave that mimicked plain flat fabric. However, the newer designs include braids, macrame, and twists. The woven threads themselves are beautiful enough to make a window treatment. However, the blending with old and new bamboo sections makes for a new and crisp treatment, worthy of a design award when used in a fashionable living room.

As the trends for higher fashion design ebb and flow in bamboo shades, consumers will be offered a fine new array of exquisite styling. Consumers should try to learn more about these new designs, all of which are available in real bamboo for prices similar to the less expensive and less design focused plastic options. The online retailers are the fastest to the market with these choices, but the unfortunate loss in ability to touch the real material is worth the trade off when realizing such great high fashion bamboo shades for one's spaces.

Judith Persit works from home in a design studio and writes about bamboo shades Learn about shades at her website.

House Pocket Door Problems

Just a few months ago I went over to repair a pocket door that was closing at a weird angle. This was the first time I had ran into this sort of situation and was definitely confused. I got a flashlight and started looking inside the pocket door frame. I had a hard time finding the problem but when I did it was obvious.

As the pocket door was sliding closed it would work perfectly but when you went to open it the bottom of the door would stick out about an inch and a half passed the door jam. The problem turned out to be the track was missing a screw in the very back and as the door slid back into the frame the tracking would hang down at an angle from the weight of the door. There was no way to reach the screw because it was at that very back of the pocket door frame near the framing itself.

In order to fix the pocket door problem I was going to have to remove a good sized area of the plastered wall at the upper right hand corner of the pocket door frame. This was the only thing I could think of and would require a simple wall patch and some paint to make the repair complete.

This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door tracking. I then use some fast setting drywall plaster and some fiberglass drywall tape to repair the wall. This took another hour to finish the drywall properly.

Some pocket door problems are a little easier to repair than this one. Most pocket doors seemed to have problems sliding and eventually are left closed, never to be used again.

Painting the doors over and over again can actually add to the thickness of the door or excessive moisture in the home over long periods of time can also cause the door to swell preventing it from opening properly.

Painting the rollers themselves or the track that the rollers ride in can create a problem with rolling the door easily and effortlessly. If the pocket door rollers or tracking is damaged they will have to be repaired or replaced, obviously. Some people actually spray silicon on the rollers or grease the pocket door wheels and over time the track becomes caked with dried grease and dirt making the door hard to open and close

Here's one most people don't ever think about and yet I have faced this problem more than once. "The Dreaded Picture Hanger". Most people don't realize that the pocket door will not operate very well with a nail driven through it. I have had people complain about their pocket door not operating properly but they can wiggle it a little.

When I come upon a situation like this it usually just requires removing the nail that the picture is hung upon.

I have also seen instances where the home has been remodeled and new floor trim or door trim has been installed. The finish carpenter using his nail gun without changing to a shorter nail has himself nailed the pocket door shut. This could be a big problem because the nails are so thin they could be hard to remove.

Well that's all I can think of for pocket door problems that I have ran into for now. Until the next article have fun remodeling your home.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Door Repairs

Home Improvement Ideas

The Essential Guide to Hallways

The essential guide to entrance halls

From the lighting to the flooring to the where to put your shoes, here's our comprehensive guide for achieving a smooth-working, stylish-looking hallway

As everyone knows, first impressions count, and one place where making an entrance is essential is your front hall. 'Your hallway is like your handshake - it sets people up for the rest of their visit,' says feng shui expert Gary Hawkes, who counts Donna Karan and Madonna as past clients. 'So if it's light, warm and welcoming, then visitors will instantly feel relaxed and at home.' And yet, despite the fact it sees more traffic than anywhere else in the house, the hallway is often left as an afterthought - a dumping ground for brollies, wellies and ancient anoraks.

During the festive period in particular, there's more than the average footfall over the threshold, so before you begin to think about decking your hall, it's essential to ensure it really is holly worthy. While some homes may be blessed with grand dimensions and an abundance of architectural features, others may need a more studied approach to maximising space, optimising storage and letting the light in. We've consulted the experts for all their tips and tricks, so you can stun the carol singers, amaze the in-laws and impress first footers with a bright, well-thought-out space that really wows as it welcomes.

Hallway storage

'Keep your hallway as clutter-free as possible,' advises Gary Hawkes. 'Avoid sharp edges, intrusive plants or anything that interferes with its flow.' Carefully planned storage is a must, particularly in period homes, where space is often at a premium.

HOW TO MAXIMISE YOUR SPACE

If you have an understairs cupboard, be ruthless. Chuck out those broken bits and bobs that you'll never get round to mending, and don't let it become a dumping ground for homeless items.
If yours is a footwear-free house, make sure there's plenty of storage next to the front door. A sturdy trunk is a great place to stash shoes and boots, and can provide a place to perch for easy boot removal. A bench with built-in storage is also a clever idea.
Create a wealth of storage without sacrificing too much floor space with a bank of floor-to-ceiling cupboards. A bespoke design means you can plan for everything from sports stuff to pet paraphernalia.
A piece of furniture, such as a bureau or console, will make a hall feel 'inhabited', and a room in its own right. It also means that there is a proper home for keys, phone chargers etc so they don't go astray.

Hallway decoration and display

'I strongly believe you only have one chance to make a good impression, so it pays to be bold,' says interior designer Tara Bernerd. 'It's essential, even in a hallway, to create some sort of focal point.'

HOW TO MAKE AN IMPACT

Even if space is an issue, you can add the wow factor with a bold piece of art. Alternatively, create your own gallery with several smaller pieces or photos.
'A dark hall won't be made brighter simply by painting it a light colour,' says interior designer and BIDA member Mary Leslie. 'Much better to have dark red, teal, pewter or bronze.' Choosing a darker shade will give the illusion that the rooms beyond are brighter and airier.
Painting woodwork the same colour as the rest of the walls will visually blur edges and give the impression of more space. And you can make a narrow space appear squarer by painting one of the shorter walls in a darker shade.
Think about how the hall connects to the next area. If space allows, double or sliding doors can create a dramatic flow through to the rest of the house.
Why not go wild with an opulent wallpaper? If you have a picture rail or dado, paper underneath only, as this will stop the design feeling oppressive.
Add a mirror. Not only will it enable you to check your hair before you leave the house, it can help a small space seem bigger and bounce light around.

Hallway flooring

Hall floors must stand up to a vast amount of wear and tear, but durable doesn't have to mean dull. 'The hall is often a smaller area to cover,' observes Tara Bernerd, 'so you can consider bolder or more dynamic flooring.'

HOW TO CHOOSE A SURFACE

Introduce colour with a stylish runner. For stairs, buy an extra metre, which can be tucked under and the runner moved up periodically to even out wear.
If sealed correctly, wood flooring, whether solid or engineered, is a hardwearing option. Go traditional with warm oaks, or choose paler or extra-wide boards for a more modern feel. Reclaimed boards or parquet add real character. Visit salvo.co.uk for a dealer.
Moroccan tiles will add a splash of colour and pattern. Try Dar Interiors for a good selection.
From slate to limestone to travertine, stone is an elegant choice. When laying new tiles, consult a structural engineer to check the floor is strong enough to take the weight, as it may need extra joists.
A decent-sized doormat is a must. 'If possible, sink your mat into a shallow well,' suggests Mark Dyson. 'This prevents it slipping and catches any extra dirt.

Hallway lighting

'The perfect lighting will create the illusion of a bright and voluminous area, even if it lacks natural daylight,' says Rebecca Weir, design director at Light IQ. It's a delicate balance, however, as too much illumination can make the space feel stark, whereas too little may make for a rather gloomy greeting.

HOW TO GET THE LIGHT RIGHT

Flexible lighting is key, so fit dimmers, as they allow for low-level lighting in the evenings, and brighter task lighting on busy mornings. Put lights on switches at both ends of the space so you're never in the dark.
Layers of light work well in a hallway. Downlighters can help widen a narrow space, uplighters are great for highlighting interesting architectural features and low-level lights will cast a warm glow across the floor.
'Fluorescent light sources are a good option as they can be hidden from view but provide a wonderful volume of light,' says Rebecca. 'They're energy efficient and come in lots of different "temperatures" of white, from warm to cool and bright.'
Decorative fittings, such as a statement chandelier, can create impact as well as adding sparkle. Team with table lamps for a welcoming glow.
Maximise natural light by adding glazing to the front door or a skylight to the stairwell. 'Many Victorian houses have a rear window at their half landing,' says architect Mark Dyson, 'and it's possible to enlarge this to full height without planning permission.'

You can find more information on interior design and interior design ideas at Livingetc

Books on Home Building - Professional Advice

If you're a do it yourself or or a homeowner who every once in a while, once to tackle a small or large project but doesn't know where to begin, can gather useful information from home building books. I have been using these books for years and may have been worth their weight in gold.

I started my career working for my father and my father worked for his father as a Carpenter. Our job was to frame the house and we built a Lotta homes. I learned how to frame and developed some great carpentry skills from my father and working with other skilled carpenters. Over the years, if you're paying attention, even a monkey can figure out, how to assemble almost anything.

The only problem that I faced, was learning how to build the rest of the home. I would often ask questions to other building trades like plumbers, electricians, roofers and construction superintendents. Some of these people were helpful and others were not. When I was in my early 30s, I purchased my first book on home building. This book lead to other books and soon I found myself with more home building knowledge that my father.

I had about 50 books on home building and soon found myself doing large home remodels, with no formal education. I would attribute almost everything that I learned outside of house framing to books. These books have proven invaluable to me over the years and with a relatively small investment. I couldn't have spent over $200 purchasing these books but have used the knowledge from them to save myself thousands of dollars.

One $20 home building books or home repairs, can save you lots of money, if you're willing to do a little research and the labor to complete almost any home building project.

By the way, if you're interested in learning how to repair a roof, build your own house, interior decorating, structural engineering, building a deck, gathering some more information about home painting or even remodeling your bathroom. An online home building bookstore can save you money if you're willing to do the work.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping

If your looking for some more home inspection or home building ideas

What You Need to Know When You Design a Screened Porch

Respected scientists have, through painstaking research, discovered that a single mosquito can lift 10 times its own weight. This means of course, that it takes a mere 11,253,534 mosquitoes to grab, lift, and fly away with an average-sized toy poodle.

Alarming as that may seem, it is not nearly as scary as the fact that 11,253,534 is also the exact number of mosquitoes contained within a cubic meter of mid-summer air found in the typical Midwestern backyard. Which is precisely why those same respected scientists invented the screened porch.

In temperate climates, flying insects can make the enjoyment of warm summer nights very difficult. Americans spend a great deal on money on various methods of repelling the buzzing vampires. We spend even more money on decks and patios only to find their use limited by the local bug population. And that's exactly why so many homeowners make a screened porch an indispensable part of their house.

My clients often ask me whether a screened porch or a "Florida" or "three-season" room is more appropriate for outdoor living in the Midwest. They're very different kinds of spaces; a three-season room is much more than just a screened porch with windows.

Building codes typically require any enclosed space that is capable of being heated and cooled to meet all of the requirements of indoor living space. That means going beyond basic structural stability: a room enclosed with walls and glass must be insulated, heated, provided with adequate natural and/or artificial lighting, fitted with the proper number of electrical outlets, and meet mechanical energy codes.

A screened porch, however, is considered to be outdoor living space and need only be structurally sound. As long as it isn't high enough off of the ground to require a railing, few other code demands are made. There's a cost difference, too, since a screened porch requires fewer trades and far less material to build. It's a relatively cheap way to add living space and extend the enjoyment of your yard and garden into the spring and fall.

But the true delight of a screened porch is the feeling of being outside, without the rain, blazing sun, or bugs. That's an experience that isn't felt in even the most highly glazed "Florida rooms". It's a common mistake to overdo a screened porch, to add more columns than necessary or to install a half-height wall around the perimeter. Anything that creates physical or visual separation between the inside and outside erodes the illusion. The best screened porches are as transparent as possible.

Finding just the right location for a screened porch can be tough, especially on narrow suburban lots. In most cases, the screened porch should be connected to another family gathering area and close to the kitchen, with views of a yard or garden. But how to do that without blocking the views from other rooms? Again, transparency is the key. Make the screens as big as possible and the ceiling high, add a skylight or two, and you'll still have a good view from inside the house.

Materials for a screened porch should be chosen first for architectural compatibility with the house, and second for durability. If the porch is to be painted, make sure to choose a species and grade of wood that will hold paint well. Cedar, redwood, and other Western softwoods are excellent for paint adhesion. Cedar and redwood are also known for their natural resistance to insects and rot.

Other options for the porch's frame include pressure-treated lumber and several recently introduced simulated wood products made from varying proportions of post-consumer recycled plastics and waste wood fibers. These "polymer-lumber" materials offer excellent rot and insect resistance, and eventually weather to a pleasing gray color.

The screens themselves can be made of metal or plastic screening. Plastic screening is usually the best choice, offering rust resistance, light weight, and durability. And although the screens can be attached directly to the porch frame, a "pre-framed" screen system allows for easy replacement and cleaning by simply removing the entire screen and frame as a single unit. A local screen contractor will measure the existing openings and build the pre-framed screens to fit.

A well-designed and well-built screened porch adds value, function, character, and enjoyment to a home. It can get you a little more in touch with the outdoors, and give you another reason to keep the garden weeded. It can also get the bug zapper out of your yard -- and save you a small fortune on citronella.

Richard L. Taylor, AIA is a published author and recognized expert in Residential Architecture. He is President of Richard Taylor Architects, a 5-person firm in Historic Dublin, Ohio. Residential Architect | Luxury Home Plans

Home Bridge Construction Loans - Providing You the Funds You Need to Construct Your New Home

Are you planning to sell your old home and build a new one? If you are, then you may need to get some funds to construct your new home. However, you need to face the fact that selling homes today can be quite difficult. So, how will you be able to construct your new home if you can't sell your old home as fast as you can? Without selling your home, you will be faced with a dilemma where you will never have enough money to buy a new one.

Today, it is now possible for you to get the funds that you need in order for you to construct your new home even before you sell your old home. By taking out a bridge construction loan, this will be able to cover both the homes you are selling and the home you want to construct.

The great thing about bridge construction loans is that it is quite easy to qualify. The reason for this is that most lending companies know that you will only be obligated on both properties on a limited period of time.

You need to understand that bridge construction loans or home bridge loans are short term loans where it will only require you to pay one monthly payment and one closing payment. To make it more convenient, most bridge construction loans have low interest rates compared to other types of mortgages.

These are the things that you can benefit from with bridge construction loans. With it, you will be able to get the funds you need to construct your new home before you even sell your old home.

To Learn More About Bridge Mortgage Lenders and Loan Programs, Visit the Bridge Mortgage Loans Information Center Today at http://www.bridge-mortgage-loans.com/

How to Make a Wooden Gate

There are some simple home projects which you do not need to go out and hire some expensive contractor or carpenter. One of these which you yourself can do is a wooden gate for your yard.

Relax, making a wooden gate all by ourselves is an exciting adventure and doesn't need to be hard or impossible. If we do everything systematically it shouldn't be too hard. To build a wooden gate we need the right design for a specific purpose.

In making a wooden gate ourselves the first thing we need to do is design it. This means we take exact measurements based on the width of the opening where we want to put up the gate. We also consider the height of the fence around it. Everything must be complementary, after all we want form and functionality, right?

Then we buy the needed wood pieces-4 by 4 inches latch and hinge posts, gate frames measuring 2 by 4 inches and picket wood pieces measuring 1 by 2 inches. These are mere suggestions; wood sizes may vary depending on our wooden gate design. We also need screws, some nails, 3 to 4 hinge sets, and the latch. The sizes and number of pieces depend on the size of the wooden gate.

We dig holes for the latch and hinge posts. A depth of 3 feet, more or less, ought to do. Insert one end of the posts into the holes and reinforce with rocks and earth intact at the sides to keep it from moving. Or pour concrete at the sides. Then we install horizontal frames for the wooden gate fitting the gateway. We also fix the gate hinges permanently to the hinge post.

Then we install the diagonal frames. Measure them to accurately fit the horizontal frames. To attach, drill holes through them and the horizontal frames and insert long screws. Mark spots, which are evenly spaced, allotted for the pickets. Use a square. Then attach them to the wooden gate using nails or screws at their bottom side. Two screws or nails each would do.

Finally, re-mount the wooden gate. Detach the gate to render the wood to a smooth finish and accurate fitting by scraping extra wood thickness. Then re-mount by attaching again to the hinges permanently. Make sure the wooden gate opens and closes to and from its jamb or latch post smoothly.

It is best to make the wooden gate right where we intend to install it. This enables us to get the actual measurement needed and base the wooden gate dimensions from it. Handle carpentry tools and materials with the greatest care and make sure to wear fitting gloves when hammering nails, driving screws, or cutting with a saw.

Make sure all tools are in good condition, like ensuring that the chisel or plain blades are sharp. Sharp tools make the work easier and safer. Wear a carpentry apron if necessary.

It's exciting to make our own wooden gate. We can start experimenting with our garden gate.

John Grant is a the author for a how to site where he is writing articles about how to build a gate.

Contractor Drinking Coffee

Home Improvement Remodeling - Start in the Kitchen Or Bathroom

Modifying a room in your home can be a huge task. Your home improvement remodeling may need lot of planning and your time. You will see that many home improvement remodeling projects may require a considerable amount of monetary resources as well yet hiring a local remodeling contractor can make the planning process hassle free.

Lots of times, just a bit of home improvement remodeling can perk a space up by giving it added color. Even the littlest alterations in an area can provide a big lift both visually and emotionally. Numerous projects can be accomplished on your own with store-bought kits. On the other hand, an area builder has equipment, experience, and relevant suggestions that are highly likely to be much better.

If you want to remodel your home, you should first consider remodeling your bathroom . You can find some photos about bathroom remodeling online for reference. Then you can simply install new faucets and shower accessories to give your bathroom a whole new look. However, if you want to remodel your bathroom effectively, you may want to ask a contractor for advice .

You may possibly change the fashion of a space to any point in history. To mend the temperament of a room is to take a predictable looking one and change it to a contemporary one in some way. Modern style uses a blend of conventional and intermediary objects, which show fine in any room. We are coming to know local contractors that are incredibly well versed in these remodeling techniques.

When you are looking to soften the appearance of a room or an area, consider the large selection of decorations and accessories possessing an antique, warm brushed, or satin tone finish. The hard luster of chrome can be replaced with the soft sheen of brushed nickel. Antique copper is another exquisite, silky metal often available through remodeling contractors for a reasonable price.

Simply painting a room can drastically modify the feel of the room. Remodeling contractors around the country boast of new painting methods still not available to the general public. In order to choose the best color scheme for your room, consider the direction the windows are facing. If the windows face to the south or the west, then cooler colors provide a better lighting effect. If the windows face to the north or the east, then hot colors like orange, yellow and red are the best choices.

When deciding that more than one color should be used for your project, it is recommended that you lean towards the strong color as your main look. You will want the bolder color to be the main theme and then select a more subtle color that will give it added style. You might want to get the advice of a local contractor for advice for your home improvement remodeling job. It can be rewarding.

Your home improvement remodeling can be a diminutive venture that can go a long way. Alterations in fashion can radically change a room. Kits can help homeowners, but nothing replaces a contractor's expertise. The bathroom is a good location to start. Most bathroom remodel projects can be completed in a short time. Changing the hardware is one way. Replacing faucets and shower heads can revolutionize the room's appearance. One technique to change the mood of a room is to paint. A process that contractors are using is if the windows face south or west use cool colors. If the windows face north or east then choose bright warm colors.

Roofing Options Continued

We previously explored roofing options such as asphalt shingle and ceramic tile, weighing the pros and cons of each. Considering the importance of a well-functioning roof, we will continue the discussion of roofing options here.

Wood shingle is a relatively inexpensive option for roofing. First it might be helpful to distinguish the difference between shakes and shingles.

A shingle is cut with a saw, and has a smoother finish than a shake. Shakes are split, and the wood is more rippled. The rippling in shakes actually encourages water to run down them quickly.

Most often, cedar is the wood of choice for shakes or shingles. This is due to a naturally occurring oil in the wood that discourages rot and bugs, making it far longer lasting than other woods. Shingles and shakes can both be applied over old asphalt or cedar shingles. Shakes require an open sheathing underneath them, so that air can flow and dry any dampness in the shakes themselves. Because of their irregular surface, it is recommended that shakes be layered with a course of felt material, and on solid sheathing, which will fill in any gaps and completely weather-proof.

The only major con to shakes or shingles is that they are not fire-proof. Also, the water collected off them is undrinkable for up to 6 years because of the same volatile oil that deters bugs and rot. After six years, however, it is usable water. Cedar shakes or shingles can last up to 25 years.

Slate is another interesting, and very attractive, option for roofing. Slate's biggest downfall is its high expense. However it is extremely long lasting-a 100 year old slate roof is not uncommon. It is also fire-proof, rot-proof, and a very low maintenance roofing material in general, resistant to acid rain and fading. Also, because it is also all natural, collecting water from your slate roof is very viable.

Metal roofing is probably the most light-weight roofing option. The cost of metal roofing is moderate, about mid-range compared to the other options discussed. It can easily be installed on top of older roofing, and is known for being very low maintenance. Modern metal roofing is usually made of aluminum or a steel alloy. It is then coated with a rust-resistant coating, available in a variety of nice colors. The biggest caution is that this coating is not scraped off during the installation of your metal roof.

Written on behalf of the Orlando real estate team at OrlandoMLS.com. Visit them if you are looking for an Orlando Realtor, or want to search the Orlando MLS listings.

Drywall

Bathroom Vanities - The Antique Look Without the Hassle

Though many people enjoy the look of modern bathroom fixtures and all of the luxuries they contain, others prefer the older look of long ago, a gentler, romantic time.

With the demand of antique dcor for the home and especially the bathroom, a number of companies are starting to make more furniture and fixtures that have an antique look, but don't have the problems that occur with the real thing. If you are planning an antique look for your bathroom, consider taking a look at the new vanities that look old before heading out to second hand stores.

The old look for a bathroom vanity is awesome, true; however, have you even pondered the plumbing that goes with the fixture you are thinking of? The plumbing and the sturdiness of the antique vanity can create problems for you. After you have rethought this, you will probably see why the new vanity is the better choice.

New furnishings give you the look you want, the antique feeling, but not the worries of trying to integrate old furnishings into a newer home.

There have been huge advancements made since those old bathroom vanities were designed. Vanities made today function better and high quality choices are more durable than ever before. You will still have the look you are going for, but without all the problems that a real antique vanity will bring to you.

There are many drawbacks of buying an actual antique bathroom vanity. First, you will be paying a high price to purchase one that is still in good condition. Next, you will have to restore it. This takes time and money, and in the end, it would have been cheaper and less time consuming to buy the one that looks like an antique, but is without the worries of a used, old vanity.

When you think about the work and money involved, it could be more reasonable to go with the new version that has the older look you want. Although the older vanities are pretty and will look great, you don't want the problems that could go with them.

Before you spend too much money and time on an antique vanity, consider the options. You are the boss here, if you want to spend the money, go with the one you want, it is your bathroom. But, if you want a functional one that looks great, for half the worry and cost, take a look at purchasing a new vanity in the look and style that you want.

Visit us for more information on Discount Bathroom Vanity Tips, Remodel A Small Bathroom - And Keep Your Bathroom Vanity and Bedroom Vanity Design.

Concrete Patio Gofer Damage

Advantages Of Various Patio Doors

Patio doors present appropriate access with added advantages over standard entry doors. These doors are entirely glazed to expand the view and pouring the interior with natural light. As old-style patio doors were notorious for heat loss and poor security, modern doors offer significant improvements. The frames and glazing are more energy-efficient, incorporate multi-point locking mechanisms for enhanced security, and sophisticated flashing packages to prevent leakage. The basic types of patio doors are sliding and hinged, offering distinct feature sets. Sliding patio doors are best for maximizing views and admitting daylight. They contain two or more individual panels; at least one is able to slide back and forth on concealed rollers. Sliding panels can be united with fixed panels to make dramatically wide expanses of glazing. Panels will slide parallel to the wall so they don't obstruct furniture placement or walking areas outdoors or in indoors.

Whereas hinged patio doors operate in much the same way as standard entry doors, but they are completely glazed and frequently hang in pairs. In one pattern, the doors are center hung and open much as butterfly wings. On the other hand French doors are hinged at the side jambs that the door panels meet when it is closed. The latching mechanism is enclosed in an astragal that is mounted to one of the doors. When these doors are open, the whole area between the hinges is apparent. Choosing a patio door comes down to a subject of aesthetics versus energy-efficiency. Swinging doors can be weather-stripped more efficiently than a sliding door, but individual panels are narrow and more visually obstructive. Sliding doors are more space efficient and lend itself to larger openings, but the huge expanse of glass is complicated in regard to heat loss and also solar heat gain.

The two major elements of a patio door are the border and the glazing, and depending on which part of the country the door will be used, either one of these things may be the deciding factor. The metal-frame doors are characteristically less luxurious and less energy-efficient than the fiberglass or wood doors, but they are offering the advantage of a less obtrusive casing. The main disadvantage of a wooden frame is the amount of maintenance that it requires. Clad goods try to offer the best of both the worlds, and have the energy-efficiency of a wood casing with low-maintenance of vinyl or aluminum cladding. Taking the case of clad wood patio doors, manufacturers offer a selection of wood for the core surfaces of the frame, normally a veneer. Try to choose wood such as pine if the inner surface will be painted. Other woods, such as Mahogany, Douglas fir, alder and maple are more suitable for stained or apparent finishes. The glazing of a patio doors have a considerable impact on its energy efficiency and its cost. These doors, particularly the sliding models, offer wide expanses of glazing to arrest views and admit daylight, but that same expanse is a major source of heat gain in the summer and also heat loss in the winter. Manufacturers are offering a number of glazing options to lessen heat loss and heat gain.

Ronvictor is a expert author for Replacement windows and New construction windows. He has written many articles in various topics such as vinl windows, Vinyl Replacement windows, custom vinyl windows. For more information visit: http://customorderonline.com

Contact me at ron.seocopywriter@gmail.com

Pocket Door Problems

Moisture Against Gravity - Destroying Walls

Well I'm going to start this article with a little information on a job I did once.

I had been repairing a rental house for one particular homeowner for about three years when all of a sudden I got a phone call from him telling me the rental house was destroyed and he had never seen nothing like this. He sounded so upset over the phone I told him I would meet with him immediately.

On my way to the house I was trying to get an idea in my head what the house was going to actually look like. Since I have been repairing rental properties for over 20 years at this point of my career, nothing really shocked me. I had pretty much seen everything that could possibly be done to rental property by the tenants that lived there. There is a lot to be said about taking care of it as if it were your own.

He was waiting for me at the front door and he looked thoroughly disgusted. As I approached him he was shaking his head and yelling at the same time can you believe these people, can you believe what they did to my house. I was expecting to see the front door ripped off and all the windows broken out of the house but this wasn't the case.

As he led me through the home and I could see the usual clothing on the floor, broken cabinets, a few holes in the walls and of course that awful smell of mold and mildew. All of this stuff was nothing new to me because I'm the guy they call to fix it when a renter moves out of the property.

As I entered one of the bedrooms I got my first glimpse of something I had never seen before but heard stories about and could not believe my eyes. Looking at the walls in the bedroom about 3 feet from the floor all the way around the room, the plaster was soft. It actually looks like someone shoved popcorn into the wall somehow.

The homeowner wasn't even looking at this because of the rest of the damage in the home. I started to explain to him I'd never seen nothing like this but I could guess it was water damage somehow since the plaster was soft. I could actually stick my finger into the wall, that's how soft the plaster was.

My first thought was to examine the carpeting a little closer to see if it was wet. Well it was damp but it wasn't as wet as I would've expected it to be with the amount of water in the walls. With a little more home inspecting I had found the culprit, it was a broken water bed. The water bed was now in the backyard looking innocent.

I couldn't believe a broken water bed could do this much damage so I looked around for broken or leaking water pipes and could not find any. The other bad news I had to inform the homeowner was that the water had damage the bathroom and closet walls also. These walls of course were on the other side of the bathroom walls that were damaged.

Well the point of this story is that water will actually wick its way up or worked its way up into a wall. I had to remove 4 feet of drywall all the way around the room. The plaster or drywall actually acts like a sponge pulling the water into the walls. Hard to imagine that gravity in this case seems to reverse. I would've never thought that water would've traveled so far up the walls creating that much damage.

To repair the rental property I had to remove the damaged drywall, remove the carpeting, dry the wood framing out and put the whole thing back together.

I'm still amazed and will remember that project for as long as I live.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Water Damage

New Versus Old Lumber - Structural Failure

During my 30 years of remodeling and building new homes. I have ran across quite a bit of structural framing failures. I find myself answering this question a lot when explaining to a homeowner about the structural failure I am repairing on their home, "Why Didn't They Use Better Lumber" or " Why Didn't They Use Larger Lumber." I really have a hard time answering these questions because I honestly don't know the answer.

However I can try to use some logic and reason to give these people an answer that seems to make sense to both of us. Why didn't they use better lumber, quite simply because, with most older homes that were built before the 1970s they actually do have better lumber. Now you're probably thinking how can these homes have better lumber when the lumber is old versus the new lumber used in a brand new house.

Most of the structural repairs I have made over the years has nothing to do with the lumber and whether it was new or old. A large number of these repairs were caused by neglect and poor maintenance.

The lumber in most older houses are from older growth trees. Some of these trees were extremely large and only the premium parts of the trees were used. The premium lumber is cut farthest away from the center of the tree. Now the larger the tree it makes sense that there will be more premium lumber.

A large majority of the newer lumber used in home construction comes from trees about 6 inches in diameter. Now you're probably wondering how can they cut a 2 x 8 piece of lumber out of a 6 inch tree. Of course they cannot, the larger lumber comes from larger trees.

Most 2 x 4's that are less than 8 foot long can be cut from these trees. This scrap or waste that comes from cutting these two by fours will now go into engineered building materials like particleboard, oriented strand board and engineered beams. Another name for an engineered been would be a paralam.

I hope you're starting to get the picture now when it comes to using new or old lumber. There are companies that are going into old logging rivers and retrieving old growth lumber. These were logs that sank to the bottom of the river's and were never retrieved because it was too costly.

The old growth lumber is quite expensive. Who's to say what problems we will happen in the future from the newer products created with modern day technology. When it comes to building houses it is not an exact science and as contractors we have been repairing the damage from poor engineering for years.

When I use the word poor engineering I am not pointing fingers at engineers. We now have more knowledge about home construction then we had years ago.

New versus old lumber, who wins the battle. Only time will tell.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Structural Repairs.

Skylight Framing With Light

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Contractor Drinking Coffee

Foundation Repair Choices

This day and age homeowners have many choices when faced with a structural foundation problem. The choices include helical piles, push piers, helical tie-back anchors and plate anchors. Each one of these solutions should only be implemented under the supervision of a qualified engineer and foundation repair contractor. Foundation repair is not a do-it-yourself home improvement project. Intimate knowledge of structures, soils and available products are necessary requirements before repair design can be implemented.

Homeowners must educate themselves to keep ignorant or slick talking salespeople from selling them a bill of goods. Many times the salesman does not represent all of the products that your structure may need to completely solve your foundation repair needs. If he only does waterproofing he will, at best, only slow down or prevent further problems. If he is only a pier guy, he may not have the knowledge of what caused the problem (i.e. water). This is why contacting a qualified foundation engineer is a form of checks and balances to allow for the best possible solution.

Foundation engineers will give you a written assessment of your structure including a recommended procedure to solve your homes issues. This evaluation is conducted on site and usually takes over an hour to complete. The written assessment involves an examination of the interior and exterior of the home, interior floor elevations, load calculations and recommendations on repair methods. The written report should include an imprint of his seal with the date and signature across the seal. Many times the engineer will recommend a foundation repair specialist, that he has worked with before, in his report.

You first must understand what different foundation repair methods can and cannot do to determine if they are the correct method of repair for your home. There is no such thing as one size fits all in foundation repair. Each has their place and their benefits, so make sure that the tool that you pick is the correct one for your job.

Resistance piers, also known as push piers, steel piers and Micropiles. This type of pier is an end-bearing pier that does not rely upon, nor requires, skin friction to produce support. Each pier is field load tested after it is installed. The piers are able to develop a factor of safety because the piers are installed and load tested individually using the weight of the structure as the reaction force. Unlimited lifting capability is offered in continuous lift systems. These lifts should only be performed with a manifolded hydraulic system using single or double acting hydraulic cylinders.

Steel push piers are best suited to any structural problem that requires a large lift. No other system is as suited for these large lifts. Due to the fact that these resistance piers are an end bearing pier, thus developing their support from solid contact on a load bearing stratum. Continuous lift type steel piers are the best of the steel resistance piers due to the fact that they can support and lift a structure to unlimited heights.

Helical piers are an ideal choice when you are supporting or lifting a light structure. They are the ideal choice for light structures due to the fact that they do not need the structures weight to advance into the soil. Helical anchors are screwed in the soil with a hydraulic torque motor as opposed to be pressed into the soil like steel push piers. Like the resistance piers you should only lift the structure with a manifolded hydraulic system using single or double acting hydraulic cylinders.

Helical piers consist of a shaft fabricated from either solid square steel bar or tubular steel. Welded to the shaft are one or more helical plates. Typically the plate diameters increase from the bottom of the shaft upward and vary in thickness from 3/8" to ". The torque required to install the anchor correlates to their capacity. When used to support or lift light weight structures, helical piers are an excellent choice, due to their many benefits. These benefits include the ability to be quickly installed with little or no disturbance to the site and soil removal is unnecessary, they don't require a reaction force and are extremely versatile in their applications.

While steel resistance piers and helical torque anchors are excellent choices for supporting sinking foundation elements, helical tie-back anchors and plate anchors are just as able to support or straighten concrete or block walls. When a basement wall or retaining wall bows inward one must resist this inward movement to maintain the integrity of the structure. If such a system is not installed catastrophic consequences are forthcoming.

Tie-back anchors and plate anchors resist the lateral soil and water forces exerted on basement and retaining walls. While both systems have different advantages they both provide the same function. They use the surrounding stable soils to resist the pressures of unstable consolidating soils near the foundation.

While one or more of these systems my be needed to fix your foundation problem, understanding each method is the key to determining the solution that best fits your situation. The hiring of a foundation engineer is the most effective method of making this determination.

About the Author:

Jeff Tully invites you to view his website http://www.myfoundationrepairs.com if you are having any foundation issues including bowing walls, cracks in your foundation or any type of settlement issue. On this website you will find the truth about foundation repair methods and what you should expect. There are many misconceptions about foundation piers or tie backs, get the straight answers here.

This site was designed and built with the homeowner in mind is the only true source for foundation repair and waterproofing information. From determining if you really have a structural issue to hiring an engineer or foundation expert, you will find the answers on my site.

Home Building Books