Monday, June 30, 2008

How to Build a Greenhouse - Designs, Planning and Material

It can be exciting to construct our own structures and many would want to jump straight into the project of building their own greenhouse. But a note of caution, planning is a important step in the process to save you extra hours of work. A greenhouse draws on several factors to provide an ecosystem suitable for the plants you wish to grow. You will need to factor in lighting systems that will provide the optimum environment.

Greenhouses come in a wide variety of styles and sizes. You can find premade greenhouses that will give you all the options you can think of, including a variety of designs, sizes and prices to best accommodate your budget. You can find an array of different materials, including plastic, polycarbonates, glass, partial wood, aluminum and more that makes up your greenhou16C2se. If you are constructing your own, you can locate a wider variety of materials to be used.

You will find similar issues if you buy or if you build a premade greenhouse. You will have to solve some questions on your greenhouse.

You will have to figure out what kind of foundation you want, including no foundation at all. Usually, foundations are made of wood, gravel or cement. You can even find brick foundations. You will have to decide whether or not you want to cover your foundation with linoleum, tile or carpet on top of that, depending on your preference and where you live. You can also find floor heating systems that will keep your floors comfortable in the winter months. These systems, however, will take time to clean and investment funds.

Depending on where you live, you will have to see what kinds of trees are around you and how many trees there are. This affects the duration in which you have access to direct sunlight. You will have to learn your own local environment as well, to accommodate around wind, hail, snow and rain. You need to ascertain that the greenhouse is built to deal with the elements you enforce on it.

Depending on your geographic location, you will find greenhouses that can best accommodate your surroundings. In the northern states, you will see less sunshine in the winter months and have to deal with a high amount of snow, but you can find greenhouses that will help you around these factors, including electrical lighting and heating systems to protect your plants and flowers.

The level of humidity and heat in the area will affect your plants. Summers can be more dry in some areas of the country than in others, so these dry areas will need more water than more lush areas like the Northeast New Hampshire area.

You will need to also make sure that the size of your greenhouse matches the size of your property. You will need a flat area ideal for your greenhouse. You also don't want an area that has too much wind or too many trees if you want more sun in your greenhouse. You can find trees that will block rainfall and the sunshine so depending on what you wan to do with your greenhouse, you will have to look out for these things on your own property.

Moses Wright is a greenhouse gardening enthusiast. You can find more tips and resources on greenhouse home garden and selecting greenhouse gardening plants.

Outdoor Fountains Add Charm and Style to Any Outdoor Setting

Outdoor fountains fit into any style garden. A fountain packs a lot of charm into a small landscaping space. Whether traditional or contemporary, it propels a stream of water through the air and creates a cooling effect. It's ideal for up-close viewing, which is why fountains are usually located on a porch, patio, or other sitting area.

A fountain can attach to a wall or stand alone. Some freestanding fountains are designed to rest in-or next to-a pool or pond, while others are water features unto themselves, working well on a deck, patio, lawn, or tucked into a flower bed. Tabletop fountains have recently become popular, taking just minutes to set up.

You can choose from a wide variety of styles, colors, materials, and sizes. However, choose an outdoor water fountain that 13F6is in keeping with the overall style of your garden and home. A classical statuary fountain might look out of place in a simple country garden, for example. A wall fountain fashioned of brick and stone or stone look-alike is best set against similarly sturdy masonry-not wood-siding.

Most fountains are made of precast concrete. Reconstituted stone and fiberglass have also become popular, simulating the look of stone with amazing realism. Whether concrete or stone look-alike, fountains come in numerous colors and surface finishes. Finding just the right fountain for your garden takes some research. Visit garden centers to scout their offerings. Ask if there are other fountains that you can special order. Also check out mail-order catalogs. If you want a special, one-of-a-kind fountain, visit art fairs or ask at art galleries for the names of local artists who might design a fountain for you.

HINT:
If you want fish, avoid outdoor water fountains made of lead. Lead is toxic to fish. A statuary fountain adds not only splash and movement but also a decorative element that helps set the mood of the water feature.

Freestanding outdoor water fountains

Appealing because of its ease of installation, a freestanding outdoor fountains also makes an ideal focal point for a patio, flower bed, or lawn. In this type of outdoor water fountain, a small submersible pump is housed in the lower pedestal, in a hollow base beneath the bowl. Its design should allow easy access to the pump so you can clean and maintain it, usually monthly.

These ornamental fountains can be placed near a pond or pool or in the water feature itself. The decorative statue has a supply pipe projecting from its base. The pipe is connected to the pump with flexible tubing. Large statues must have firm footing. For an outdoor water fountain on the side of a pond, make sure its resting place (including any edging) is firm and level. If you want to install the fountain in the pond, you can mount it on a hollow in-pond pedestal created specifically for that purpose or build your own with mortared bricks or stone. If the statue is small, black plastic storage crates make an easy, hard-to-detect base as long as the base of the fountain is slightly under water

Caring for your outdoor water fountain

Fountains in sunny spots tend to have problems with algae. If you are not raising fish or plants in your outdoor water fountain, you can prevent algae by adding chlorine bleach to the fountain water. Add it at the rate of 2 ounces of bleach to every 10 gallons of water, once a month. If that doesn't work, increase the amount of bleach to 5 ounces. If you do have plants or fish, consider using an algaecide. Make sure it's labeled for use in ponds with fish and plants; follow package directions exactly.

Weatherproofing your outdoor water fountain

Take good care of your outdoor water fountain year-round to greatly prolong its life. One of the best things you can do for concrete fountains and statuary is to apply a concrete sealer to prevent moisture from getting into the concrete and expanding and cracking it when the water freezes. It's also important to drain the fountain before freezing weather arrives to prevent ice from forming on the pump. Ice can crack pump housings and cause seals to fail. It also can crack basins.

If you can, drain the fountain by tipping over the basin. If you can't tip the basin, siphon or pump it out. Prevent rain, ice, and snow from collecting again in the basin by covering the fountain or statuary with a sheet of plastic. Tie the plastic down well to prevent it from flapping in the wind, which quickly destroys the plastic.

Many pumps will dry out, shrinking the seals and preventing the fountain from working properly. Over winter store your pump in a bucket of water in a basement or heated garage. It's also important that the cord does not dry out; cracked cords can cause dangerous shorts.

Elizabeth Jean writes water fountain and related articles for Garden-Fountains.com, the #1 destination on the internet for wall fountains, garden fountains, and Distinctive Water Features.

A Review of Popular Water Softener Products

With so many types and brands of water softeners to choose from, how does a consumer decide what is right for their needs? How does one compare water softeners and find the one that will work the best for them? When it comes to buying water softeners, being an educated consumer is the best policy. Explore different types and manufacturers. Compare prices. Other things to consider are what type of environment the water softener will be set up in, size, installation, construction of the unit, convenience, and water softener rating which indicates the amount of minerals that can be removed before the unit needs to be recharged.

Kinetico water softeners are favored for their convenience; however, they are expensive in terms of the units cost as well as the price of upkeep. They recharge based on volume, eliminating the need for a schedule. Kinetico water softeners are also non-electric units.

Culligan services residential customers, offering purchase and rental options for their water softeners. They also offer a salt delivery service with the purchase of a water softener. Culligan is favored for its durability, but some have trouble with salt refills and strength of some of the components. Culligan is also said to be good at removing iron from the water supply.

Kenmore, in addition to being known for its air filtration and other household appliances, offers a range of water softeners, from the very basic to the heavy-duty models. The Kenmore systems also offer extras like the ability to filter out larger particles and added settings that make the units more efficient. Kenmore contends that the cost of everyday household upkeep can be cut in half with the use of a water softener system.

General Electric, or GE, founded by none other than Thomas Edison, offers a diverse line of products, including water softeners. The business is run on the principles, ""imagine, solve, build, and lead."" GE offers water softeners small enough to accommodate a single-person household all the way up to a unit that will serve a household of four or more people. The GE water softeners include a technology called SmartSoft, which works through a low-capacity transformer to save energy, minimize salt loss, and gauge water softening needs.

There are numerous water softener vendors out there who sell both ionic exchange and magnetic water softening systems. To find the best water softeners is a daunting task, but a good start might be to visit your local hardware store. You can also get information from people around you such as neighbors or coworkers.

Water Softeners Info provides detailed information about magnetic and ionic exchange water softeners, home water softener systems and kits, product reviews and comparisons, water softener salt, and more. Water Softeners Info is the sister site of Dishwashers Web.

Saturday, June 28, 2008

How to Pick the RIGHT Remodeling Estimate - Beware of the "Low-Ball" Bidder!

The process of selecting a contractor to do your home remodeling project can be daunting. First comes locating the contractor, then the interview, contacting their references, verifying insurances and licenses. Once this is settled it is time to move forward and start receiving estimates or "bids". Construction bids are unique animals. When you are considering buying a new car you can see what the finished product looks like. You can also take it for a ride to see if it feels right to you. With a construction project you have no idea what the final result will be. You can only make a decision based on what you see on paper and getting to know the contractor.

The Bid or the Contractor- What is More Important?

One question homeowners will always ask themselves when reviewing bids is - "Which one should I go with?" Maybe the correct question should be "Which contractor do I feel most comfortable about hiring?" When it is all said and done most homeowners will look back at their remodeling project and the first question they ask themselves is typically-did we hire the RIGHT contractor for what we wanted done? If the contractor did a great job and was a pleasure to work with a homeowner couldn't ask for more. Very seldom is the cost of the project even considered at this point.

But what if the project was a living nightmare - does having saved some money really matter to the homeowner at this point in time? Believe me, it is the last thing on their mind. All they wanted was to hire a good, hard-working, ethical contractor they could trust and pay a fair price for his/her expertise. But now they will only look back and remember hearing "My price can't be beat" or "I'm cheaper because I don't have the overhead" or "Hire me today and I'll give you a great deal." They feel like idiots because they were gullible and went with the cheapest estimate. Don't let cost be the deciding factor in who you hire.

"Low-Ball" Bids

When a contractor deliberately under bids the real price of the job hoping to be hired it is called a "low-ball" bid. These bids are generally much lower than any other bids you have received - usually 20-25% or more. Many are done intentionally by unscrupulous contractors while others are presented by contractors who are incompetent and they may have overlooked unavoidable costs. Either way, these are not the contractors you want working in your home. These contractors are hoping that the homeowner will only consider cost when settling on who they should hire.

Low-ball bids will often include poor quality materials, inferior craftsmanship, no insurance and/or licenses, poor project management, dragged out projects, and a failure to perform the required work safely. It is very typical as your project proceeds that the low-balling contractor will find reasons to get you to raise the price up to what the bid should have been originally and present you with change orders to accomplish this. Don't let this happen!

Let's look at an example of a possible "low-ball" bid:

You have received 3 estimates from contractors you are considering hiring. One estimate is for $11,000, another is $10,500 and the third is $7,800. Ask yourself why is there is more than a $3,000 difference between the high and low bids? Are all the contractors bidding on the same materials, labor and fixtures? Are they all licensed, insured, and have provided you with a written contract and guarantee? Are the allowances all similar? The low estimate should be a "red flag" - proceed with extreme caution.

Which Bid Should You Choose?

Your "gut-feeling" will come into play as you interview various contractors-listen to it! It carries more weight than you realize. Don't let cost be the deciding factor in who you hire.

1) If you receive a bid that is very low, don't even consider it. Stay away from contractors that offer you such a bid. Low-balling is, in my opinion, dishonest. Possibly the worst reason that a contractor might submit a low-ball bid is that they have no intention of doing the work. They may start your project but they won't be around for too long.

2) If you receive a bid that is way too high, eliminate it also. Some contractors will purposely bid high on a job they don't really want just to see if a homeowner is foolish enough to hire them anyway.

3) You should now be left with the "middle bids" and hopefully a contractor that you like.

Also consider this when deciding on what bid to accept:

60% of your decision on who to hire should be based on their workmanship skills, experience with projects like yours, and reference checks.

30% of your decision should be based on the contractor's ability/experience to keep the project moving forward, communication skills and cooperation.

1056A% of your decision should be based on the actual cost of the project.

Don't focus on the cost of your project when selecting a contractor. This only gives you tunnel-vision to what really needs to be addressed. Planning and lots of patience will head you in the right direction when a home project becomes part of your life. Do it right the first time and your project will be a success.

Paul Lawrence has owned and operated Home Project Partners, a free Maine-based contractor referral service, since 2002. He helps bring homeowners together with reliable, quality-conscious, pre-screened home contractors skilled in numerous trades. Paul makes presentations to realtors and other groups that have an interest in his service. He has also taught adult education classes showing homeowners how to find contractors on their own and to learn how to properly screen a contractor.

For more information contact Paul at info@HomeProjectPartners.com or visit online at http://www.HomeProjectPartners.com

The Lasting Appeal of Monterey Architecture

Monterey architecture helped define the look of many Southern California cities, and is still one of the region's most popular home building styles. It's not uncommon to see entire neighborhoods of Monterey homes, especially in coas5B4tal areas where the abundantly-windowed style helps keep the ocean in clear view, and enables residents to transition easily between indoor and outdoor living. The timelessness of Monterey architecture, with its emphasis on clean, vertically-oriented features and functional layout, continues to make it an attractive choice for new home builders; Monterey neighborhoods often feature a mix of new and antique homes built to the same specifications, in a testament to the style's lasting appeal.

Monterey is a quintessential southwest coast style, but it also relies heavily on east coast building traditions. That's because the style was pioneered by an east-coaster, Boston merchant Thomas Larkin, who relocated to Monterey, California in 1939. Larkin envisioned a new home style for his new city, one that merged the New England Colonial look with adobe construction. A wealthy and influential businessman, Larkin was able to quickly channel his vision and build one of Monterey's most prominent homes.

The finished product was unlike anything people in the region had seen, offering all the majesty of an eastern seaboard estate mixed with traditional southwest understated elegance and functionality. Larkin's home also introduced a new building feature in Southern California construction: second floor balconies. At the time homes with one story designs dominated the region, and the second floor balcony concept was seen as a breakthrough f58Bor lifestyle and aesthetic appeal.

As the capital of the Mexican territory of California, Monterey was an important cultural center, and the origin of many regional trends. Monterey architecture blossomed throughout Southwest California during the last years of Mexican rule, and became even more popular when California was made a U.S. state in 1849. During the Spanish Colonial revival of the 1920s and 30s when southwest building forms flourished throughout the country, Monterey architecture was one of several styles preferred by new home builders, along with Spanish mission architecture. Today Monterey homes are common in warm coastal markets from California to Florida.

Modern Monterey homes can most easily be identified by a cantilevered second-story balcony - a balcony extending from the exterior wall without ground supports, and held in place by strong beams, often backed by full length windows. Other characteristic features of the style include low-pitched gabled roofs, usually finished with shingles or tiles, and exterior stucco, adobe, or brick walls, sometimes with exposed wood beams.

Learn more about California homes for sale by owner at HomesbyLender.com The website features regularly updated 2E8home for sale by owner listings in California and every other state in the nation - buyers and sellers interested in FSBO can use this site as their primary source.

10 Tips for Keeping Your Ceramic Tiles Looking Great

You1A7B enter the bathroom. You turn on the lights. You dream of having a nice, relaxing bath or a cold, invigorating shower. What you get instead is a strangled shriek and despair.

Yes, ceramic tiles sure brighten up any bathroom or kitchen with their artistic and wonderful designs. We all love that glossy finish and the pearl-like shine. But moldy and dirty ceramic tiles are a big turn off, especially to those who have a fetish about bathing in a spotlessly clean bathroom.

What about your kitchen? Can you bear placing your food atop a surface that looks dubious? Can you imagine the germs sticking themselves to your favorite vegetable? Ewww

Alas, help from professional cleaners may cost us hundreds to thousands of dollars. That money can be better spent on other worthwhile items. All we need to know is how to properly care for our ceramic tiles so theyll keep looking clean and brand new.

1. Wipe Em Daily

Keep this as a mantra to yourself. This is easy enough to do, especially on kitchen counters, and it wont take you more than 15 minutes. All you need is a wiping cloth and some water. Always wipe surfaces after use. This is the best method from keeping dirt and debris from piling up. Dry tiles with a cloth or a sponge to prevent mildew formation.

2. Felt and Pads

Do you have heavy furniture made of wood, metal, aluminum or even plastic? Try to place felt or similar pads to their legs. This will help reduce the wear and tear on the tiles and will also facilitate easier shuffling and movement.

3. Protection with Mats

All houses have spots where heavy pivoting occurs. This could be your doorstep, or in front of the kitchen sink or the bathroom door. Situate mats of good quality to protect your tiles from pressure, weight or friction. These mats can also reduce dirt, grit, sand and oil that is deposited in your tiles since the fibers of the mat trap them nicely.

Make sure to wash the mats every once in a while to remove the deposits. Replace worn mats if possible.

4. Weekly Appointments with the Damp Mop

Aside from the daily regimen of wiping them, your ceramic tiles can also benefit a great deal from mopping them with a solution of vinegar and water. Mix cup of vinegar to a gallon or so of water and use this to mop your floor.

Let it sit for 5-10 minutes. Then mop the floor again with tap water to remove most of the vinegar and odor. The mild acidity of the vinegar will promote the death of mildew. Also, refrain from using soaps on the tiles as they will dull they surface.

5. Kiss Grime Away With Bleach

Ooh, your neighbor tracked his mud-soiled boots on your spotless white tiles. Even though you want to beat him up bad, you might want to hold in the urge because you need to act on that dirt, fast! Wipe off most of the dirt with a wet cloth. If there are stubborn streaks remaining on your beautiful tiles, its time to bring out the bleach.

Add about half a liter of bleach to a bucketful of water. Make sure you have your rubber gloves on, since bleach is very harsh on the skin. Mop the floor with the solution and let it sit for 15-20 minutes. After that, try rinsing it with water.

If stains still remain, repeat the process until you get back your shiny, sparkly tile. Remember to wipe it dry with a clean cloth after the procedure.

6. Clean that grout!

Grout is the cemented space between your tiles. White tiles usually have a white grout and white grout is a breeding ground for mildew, molds and dirt.

If you already spot mild discolorations on your growth, its time to mix about of a mild detergent to a bucketful of water. Splash some on the grout and let it sit for 5-10 minutes. After that, try scrubbing the grout with a soft cloth. The color should fade away quickly. Again, wipe your tiles with a dry cloth after the procedure.

7. Abrade me not

NEVER use abrasives and harsh soaps on your tiles. They reduce the shine and polish as well as make cracks and pits that would be a more ideal ground for dirt and grime to settle in. Use only mild soaps and detergents. Always dilute strong acids before using them on your tiles.

8. Can you hand me that toothbrush?

Stubborn dirt and grime in your grouts? Well its time to give them a little push. This will involve getting down on you hands and knees but its all worth it when you see your tiles looking like theyre newly installed.

Again, make a mild detergent solution from cup of detergent to a bucketful of water. You can add a small amount of bleach if you want, but remember to protect your hands and knees. Let it sit for a few minutes.

After that, get a used toothbrush and start scrubbing your grout. Be careful not to damage the side of the tiles. The ugly dirt should give way even with only a little force. Rinse with water and wipe dry.

9. Stock on Drying Cloth and Sponges

You might have noticed that every procedure call for wiping your tiles dry. Thats because there is no sense in performing the task yet leaving molds and mildew for a chance to attack. Remember that these organisms grow best in moist surroundings.

With all that cleaning going on, youll get tired from washing and drying the same cloth everyday so stock up for convenience.

10. Be Patient.

The thing is, people look up handy tips and tricks to cleaning their tiles. But some mail back, feeling very unsatisfied with the results. The usual problem here is PATIENCE. If a specific procedure tells you to wait for 15 minutes, its best to follow it. See, waiting allows the solution to seep into the layers of dirt and grime. The solution loosens up impacted dirt and facilitates removal. This is the key to a successful cleaning venture.

With that said, have fun in cleaning and remember: Always wipe it dry.

Lee Dobbins writes for http://tile.pagechic.com where you can learn more about types of tile and tile installation.

Articles 3

Thursday, June 26, 2008

Environmentally Friendly Architecture Design

There once was a day where one someone was speaking about the word green, it was obvious they were referring to a color formed by mixing yellow and blue. That assumption is no longer true; with our society leaning toward a healthier environment and ways we can help save the earth, the term green now takes on a whole new meaning. One way to support an environmentally conscious lifestyle is with green architecture.

'Green Architecture' is a form of environmentally sensitive design and construction. Energy-saving, sustainable development and natural materials are all hallmarks of this form of construction. Green Architecture is also sensitive to the impact of the construction on the environment in the years and decades after the construction is complete. It explores a relationship between architecture and ecology.

One of the key points to green architecture is to create synchrony with the surrounding environment. Everything about a green building should easily transition from the natural landscape, including the building materials. The best material to use for green construction is materials that have been recycled or come from easily restored resources.

Advantages of Green Architecture:

1. Optimizes the use of resources, especially energy and water. At the design and construction stage, it incorporates resource recycling during construction, and later when the building is being used.

2. It causes minimal impact on the environment during the entire building life cycle of siting, design, construction, operation, maintenance and removal.

3. Where possible, the natural topography is used to optimize energy usage.

4. It leads to reduced operating costs by optimizing resource usage. Green Architecture focuses on recycling resources - especially water. Wherever possible, it focuses on using building materials from the building site itself. Well-insulated doors, windows and walls reduce energy usage and loss.

5. Green Architecture promotes improved health of the occupants of the building, due to better natural air circulation and use of natural light.

6. Provides onsite facilities for recycling, thereby minimizing waste being sent to landfills.

Materials Commonly Used in Green Architecture

1. Recycled materials such as wood, tiles and bricks that are available at the building site or in/near the surrounding area.

2. Where new materials are used, the focus is on material that can be rapidly replenished, such as bamboo, which can be harvested for commercial use in just 6 years.

3. Insulation made from low volatile organic compounds that use materials such as recycled denim as opposed to fiberglass insulation - which has long-term adverse effects. Insulation may be treated with boric acid to retard insect damage. Organic or milk-based paints also afford protection.

4. Solar energy is an abundant resource that is used through passive solar, active solar and photovoltaic techniques.

5. Packed gravel in parking lots and driveways instead of concrete reduces rainwater run-off and replenishes ground water resources.

Many countries have developed their own standards of Green Architecture for energy-efficient and sustainable building. Given below are some common standards:

1. Code for Sustainable Homes - United Kingdom
2. EnerGuide for New Houses - Canada
3. House Energy Rating - Australia
4. Green Globes - USA, Canada and UK

Practitioners of Green Architecture and sustainable development seek to achieve ecological and aesthetic harmony between structures and their surrounding natural environments.

James Heimler, Architect Los Angeles California, owns one of the leading firms in green architecture and environmental sustainable design practices.

Side Yard Deck With Cover

10 Tips for Keeping Your Ceramic Tiles Looking Great

You1A7B enter the bathroom. You turn on the lights. You dream of having a nice, relaxing bath or a cold, invigorating shower. What you get instead is a strangled shriek and despair.

Yes, ceramic tiles sure brighten up any bathroom or kitchen with their artistic and wonderful designs. We all love that glossy finish and the pearl-like shine. But moldy and dirty ceramic tiles are a big turn off, especially to those who have a fetish about bathing in a spotlessly clean bathroom.

What about your kitchen? Can you bear placing your food atop a surface that looks dubious? Can you imagine the germs sticking themselves to your favorite vegetable? Ewww

Alas, help from professional cleaners may cost us hundreds to thousands of dollars. That money can be better spent on other worthwhile items. All we need to know is how to properly care for our ceramic tiles so theyll keep looking clean and brand new.

1. Wipe Em Daily

Keep this as a mantra to yourself. This is easy enough to do, especially on kitchen counters, and it wont take you more than 15 minutes. All you need is a wiping cloth and some water. Always wipe surfaces after use. This is the best method from keeping dirt and debris from piling up. Dry tiles with a cloth or a sponge to prevent mildew formation.

2. Felt and Pads

Do you have heavy furniture made of wood, metal, aluminum or even plastic? Try to place felt or similar pads to their legs. This will help reduce the wear and tear on the tiles and will also facilitate easier shuffling and movement.

3. Protection with Mats

All houses have spots where heavy pivoting occurs. This could be your doorstep, or in front of the kitchen sink or the bathroom door. Situate mats of good quality to protect your tiles from pressure, weight or friction. These mats can also reduce dirt, grit, sand and oil that is deposited in your tiles since the fibers of the mat trap them nicely.

Make sure to wash the mats every once in a while to remove the deposits. Replace worn mats if possible.

4. Weekly Appointments with the Damp Mop

Aside from the daily regimen of wiping them, your ceramic tiles can also benefit a great deal from mopping them with a solution of vinegar and water. Mix cup of vinegar to a gallon or so of water and use this to mop your floor.

Let it sit for 5-10 minutes. Then mop the floor again with tap water to remove most of the vinegar and odor. The mild acidity of the vinegar will promote the death of mildew. Also, refrain from using soaps on the tiles as they will dull they surface.

5. Kiss Grime Away With Bleach

Ooh, your neighbor tracked his mud-soiled boots on your spotless white tiles. Even though you want to beat him up bad, you might want to hold in the urge because you need to act on that dirt, fast! Wipe off most of the dirt with a wet cloth. If there are stubborn streaks remaining on your beautiful tiles, its time to bring out the bleach.

Add about half a liter of bleach to a bucketful of water. Make sure you have your rubber gloves on, since bleach is very harsh on the skin. Mop the floor with the solution and let it sit for 15-20 minutes. After that, try rinsing it with water.

If stains still remain, repeat the process until you get back your shiny, sparkly tile. Remember to wipe it dry with a clean cloth after the procedure.

6. Clean that grout!

Grout is the cemented space between your tiles. White tiles usually have a white grout and white grout is a breeding ground for mildew, molds and dirt.

If you already spot mild discolorations on your growth, its time to mix about of a mild detergent to a bucketful of water. Splash some on the grout and let it sit for 5-10 minutes. After that, try scrubbing the grout with a soft cloth. The color should fade away quickly. Again, wipe your tiles with a dry cloth after the procedure.

7. Abrade me not

NEVER use abrasives and harsh soaps on your tiles. They reduce the shine and polish as well as make cracks and pits that would be a more ideal ground for dirt and grime to settle in. Use only mild soaps and detergents. Always dilute strong acids before using them on your tiles.

8. Can you hand me that toothbrush?

Stubborn dirt and grime in your grouts? Well its time to give them a little push. This will involve getting down on you hands and knees but its all worth it when you see your tiles looking like theyre newly installed.

Again, make a mild detergent solution from cup of detergent to a bucketful of water. You can add a small amount of bleach if you want, but remember to protect your hands and knees. Let it sit for a few minutes.

After that, get a used toothbrush and start scrubbing your grout. Be careful not to damage the side of the tiles. The ugly dirt should give way even with only a little force. Rinse with water and wipe dry.

9. Stock on Drying Cloth and Sponges

You might have noticed that every procedure call for wiping your tiles dry. Thats because there is no sense in performing the task yet leaving molds and mildew for a chance to attack. Remember that these organisms grow best in moist surroundings.

With all that cleaning going on, youll get tired from washing and drying the same cloth everyday so stock up for convenience.

10. Be Patient.

The thing is, people look up handy tips and tricks to cleaning their tiles. But some mail back, feeling very unsatisfied with the results. The usual problem here is PATIENCE. If a specific procedure tells you to wait for 15 minutes, its best to follow it. See, waiting allows the solution to seep into the layers of dirt and grime. The solution loosens up impacted dirt and facilitates removal. This is the key to a successful cleaning venture.

With that said, have fun in cleaning and remember: Always wipe it dry.

Lee Dobbins writes for http://tile.pagechic.com where you can learn more about types of tile and tile installation.

Articles 3

Wednesday, June 25, 2008

Bathroom Remodeling Can Be Both Big and Small

There are many home improvement projects, but few can provide the benefits of a bathroom remodeling project. There are a few things to consider when remodeling your bathroom. This article will take a closer look at this topic.

Start your bathroom remodeling with your bathroom accessory and shower curtain list. Although it may not be as important and crucial as some of the other decisions you have to make at the start of your bathroom remodeling project but a little thought and action at the start can save you a lot of time, energy and money later on.

If you don't make your bathroom accessory list at the start of your project how will you know whether the fixtures that you order will match with your style in accessories? You might fi16CFnd that the stainless steel bathroom accessory look that you grow to love later in the project simply doesn't go with the style and color of the bathtub, toilet and other fixtures that you chose weeks ago.

If you are planning a complete remodeling of the bathroom, then look for some of the best designs available in remodeling magazines or websites with galleries exhibiting various designs. While bathroom remodeling can be an exciting project it can also seem daunting because of the various aspects that need to be considered for the look and design you require.

Next to consider in your bathroom remodeling design are the materials you want to use. One of the most difficult decisions that face you when you are remodeling your bathroom is the design of the ceramic tiles. In bathroom shower remodeling, great care is required in the selection of tiles used for flooring and on walls in the shower area.

When you've got an accurate drawing of your bathroom as it is now it's time to start dreaming about the bathroom that you would like to have. I think that the fun part of using squared paper to design a bathroom is drawing the new fixtures to scale on graph paper and cutting them out so that they can be pushed into position on top of another sheet of graph paper with a drawing of the room on it. At the end of the day project managing your bathroom remodeling job is a full time job and if you want to avoid the stress that it brings then you should hire someone to project manage for you.

If you spend time on the design of your small bathroom remodeling project before you start any work you will be surprised at how much space you can save by experimenting with small sized toilets, small deep bathtubs, tiny wash basins and carefully shaped small shower cubicles. Bathroom remodeling design could be an exciting project but it can also seem daunting because of the various aspects to consider. A small bathroom will always be small but there are many ways to create the illusion of a much larger room and using bathroom wall mirrors is one of the ways.

Find more helpful remodeling tips by visiting http://best-home-improvement-projects.com where you will find helpful remodeling tips, advice and resources to include Bathroom Remodeling.

Shaped 3 X 6 Rafter Tails

What's The Best Quality Marble Tile?

Today, there are several different types of natural stone used in residential and commercial applications. Their uses generally vary and would include flooring, countertops, wall covering, fireplaces and exterior facades.

It is usually a common thing for people to refer to any polished stone finish as marble, however, there is a strong possibility that they could be looking at a different type of stone, since marble is not suitable for certain applications.The most common residential uses of marble today are for window sills, fireplaces hearths, decorative foyers and bathroom floors. Other bathroom applications also include wall covering, back splashes, tub decks and showers.

Tumbled Marble Tiles Are Popular These Days

Some tiles are manufactured and processed for a finished look, and these are known as tumbled marble. The process actually involves tumbling the tiles with sand inside a large drum. After a period of time, the corners of the tiles become rounded and the edges slightly chipped, resulting in a well-worn, antiqued appearance.

The popularity of tumbled marble these days has increased dramatically, and this is especially true regarding its use for bathroom countertops and back splashes. With such a wide variety of shapes, colors, sizes and designs, tumbled marble can be used exclusively or to accent other types of tile. The number of stylish designs and touches that can be created with its sculptured trim, decorative medallions or mosaic border patterns, is virtually limitless.

Maintenance Tips

Implementing major regular cleaning and maintenance work on your floor will help a lot in mitigating, and sometimes eliminating any major problems with your tiles.

- Avoid using polished marble in high traffic areas

- Placing non-slip mats or rugs at the entrance minimizes soiling from dirt on shoes

- Use honed marble in living and dining rooms- it is more resistant to scratches.

- Quickly wipe-off anything that spills on marble immediately

- Use coasters under glasses or bottles, to prevent unnecessary spills

- Use mats or trivets to place hot items on marble

- Implement a daily and periodic cleaning routine

- Utilize clean mops and brooms when polishing the floors

- Old vacuum cleaners will scratch your marble - avoid using them

- Change mopping water frequently during cleaning

- Always rinse the tiles using clean, warm water

Marble tiles are famous for providing a cool walking surface, especially for the sections of the house that are hot and humid, since these types of tiles are able to retain the cold temperature of its surroundings. In addition, these types of tiles do not need as much cleaning, since it for one, is resistant to any moisture, and it possesses a natural shine, which is why you do not need to wax it quite as often.

The different patterns and designs found in marble appear as detailed, vein-like virulets, that are unique and are never the same on two marble tiles. Each design or pattern differ and vary from tile to tile. Each tile can also be used as subtle shading within an interior due to its muted, earthy appeal, which is preferred by home decor experts for decorative purposes.

Vanessa A. Doctor from Jump2Top - SEO Company

http://tilenet.net - Tilenet

Wallpapering

62290

69134

Thursday, June 12, 2008

Some Ideas for Remodeling Porches

Fixing up a porch is a great idea that will extend the use of your home considerably. Using just some paint, stain and basic carpentry skills, you can make your porch a pleasure to spend time on.

An example shown on DoItYourself.com shows a couple from Georgia who wanted enjoy their extended warm seasons of spring, summer and fall, but avoid the problems of mosquitoes and decided to take their slab concrete patio and make it into a screened in area they could enjoy almost all year long.

B3B

The patio was just concrete square under a roof overhang. They wanted the porch to blend in with the home, as well as protect the family from the heat, humidity and insects of the Georgia summers. The concrete slab declined slightly to allow for runoff, so there had to be some adjustments made to accommodate this feature.

Here is their step by step solution:

Step One. Cut pre-primed 4X8 sheets of beadboard ceiling paneling.

Step Two. Install the celing paneling and the ceiling fan. They used a nail gun to make the installation of the ceiling panels faster and easier than trying to swing a hammer upward. Before all of the panelling was installed, the ceiling was wired for the fan and light. This will allow the porch to remain cool and the light will allow the room to be used at night. This was a two person job, with one person holding the fan and the other connecting the wires and screwing the fan in place. The finish trim hid the seams in the paneling.

Step Three. Frame out the porch. Using 2X4 boards, they spaced them to allow for standard width screen to be installed. The crosspieces were nailed directly through the vertical braces.

Step Four. Install the interior panelling. Pine and plywood bead board paneling was secured by staple gun. These had to be trimmed along the bottom to accommodate the uneven floor.

Step Five. Install and level the exterior paneling. The harbor ad exterior panels wear put into place, from the bottom up. The first one had to be custom cut to allow for the uneven ground line and then the rest followed. These panels were painted to match the existing exterior of the house, so there was a lot of trial and error to match the aged yellow paint exactly. But weather resistant exterior paint was used so that it can be easily kept clean by rinsing Wit soap and water.

Step Six. Do the screening. Vinyl grids had to be screwed directly into the wooden frames. Then the screens were attached to the channels in the grids, so the fiberglass or aluminum screens could be slid in without using staples. When the screens were rolled into the grids with a spline, the extra screening material was cut off. With a mallet, the caps over the vinyl channels were banged into place.

Being really passionate about tree trimming and saw sharpening, Ray Walberg wrote plenty of detailed articles in this specific field. Sharing his passion in detailed publications, the author improved his experience on topics like chain saws and saw sharpening.

Second Layer Of Drywall Plaster

Make Small Bathroom Look Larger

Many of us wish that our bathrooms are a little bit roomier but wishful thinking won't increase even one square foot area. So, how can you make your bathroom look and feel larger without actually increasing the space. Here are a few tips to make your bathroom look more spacious.

1. Select light colors for the walls. Pale, soft, cool colors are best for a small bathroom and not bright, loud ones. Pastel tones, whites and neutrals all work wonderfully.

2. Floor color should also be light. If there is already a dark colored floor which you cannot replace, cover it with 5B2a light colored rug.

3. Bathroom tiles should be large. This creates a feeling of space. Wall tiles should preferably be extended up to the ceiling and it's advisable to line the edge of the ceiling with a border.

4. Remember to provide for enough storage space because if the storage space is not adequate, it will lead to clutter which makes small bathroom look smaller.

5. Install sliding doors in place of usual hinged doors.

6. It's better to avoid pedestal sinks as they don't provide storage space. Although they look cool, they are not suitable for a small bathroom.

7. Have one large mirror in the bathroom. It will reflect light and add depth to the bathroom. Don't go overboard with mirrors as one mirror is sufficient.

8. As far as lighting goes, use a countertop lamp or wall sconces. There are also other ways to bring light like skylights or larger windows.

9. Shower screens should be clear and not opaque since it gives a feeling of more space. Also it's better to have fully frameless shower screens so that there are no visual barriers.

10. Last but not the least, keep your bathroom neat and clean since a dirty and cluttered bathroom looks smaller than a neat one.

Daisy Simpson

To read more articles about home improvement especially bathroom and kitchen, please visit2CE
http://www.bathroomvanities.info/
http://www.kitchensuniverse.com/

4 X 12 Stair Stringer Trip Hazar

Three Types of Lighting for Room Remodeling

When remodeling a room, choosing the correct lighting is one of the most important considerations. Proper lighting sets the atmosphere of the room, creates a particular mood, or provides accent to an architectural style. Lighting also accentuates the good aspects of a room or disguises a rooms shortcomings.

There are three main types of lighting, general, task, and accent. Each has its own specific uses, depending on a rooms needs.

General Lighting

General lighting is sometimes called ambient lighting, and is the foundation of any rooms lighting scheme. It is what provides the overall illumination of a room, enabling the occupants to be able to walk around the room easily and safely.

There are many types of general lighting, such as chandeliers, wall or ceiling fixtures, and recessed or track lighting.

Task Lighting

Task lighting allows a rooms occupants to perform specific activities such as writing, reading, dressing, or cooking, depending upon the room being addressed. There are a number of possibilities when it comes to task lighting, such as pendant lights, portable lamps, as well as recessed or track lighting.

The important consideration for task lighting is that it must be bright enough to prevent eyestrain without causing glare or distracting shadows.

Accent Lighting

Accent lighting is designed to add drama to a room through the creation of visual interest. It can be used to spotlight paintings, plants, sculptures, or to highlight an unusual wall texture or drapery. Accent lighting generally focuses at least three times as much light on the focal point as the general light in the room, and is usually provided by recessed, track, or wall mounted lighting.

Using the three types of light dramatically improves the overall look and feel of a room, and should be one of the most carefully considered parts of any remodeling plan.

(c) Copyright 2004, Jeanette J. Fisher. All rights reserved.

Professor Jeanette Fisher, author of Doghouse to Dollhouse for Dollars, Joy to the Home, and other books teaches Real Estate Investing and Design Psychology. For more articles, tips, reports, newsletters, and sales flyer template, see http://www.doghousetodollhousefordollars.com/pages/5/index.htm

Upper Window Corner Over Moistop

Wednesday, June 11, 2008

Sanding Hardwood Floors

There are certain hardwoods that are vulnerable to weather and climate changes. Some woods contract or shorten when it is hot. Others expand when there is moisture. When this happens, the floor becomes uneven. If left unchecked, it could ruin the look of the room and even become hazardous enough to cause accidents.

You do not have to take out the planks and replace them. The more practical solution is to sand them. Sanding your floor is a project that needs your dedication and time, whether you do it yourself or hire a contractor for it.

Sanding It All Away

For the initial sanding, you will need to use the coarsest sandpaper- the 20 grit. There is a sanding machine that you can use to make the whole ordeal easier and faster.

For efficiency, you will need to sand the floor at a 45 degree angle to the grain. It may take several rounds before the surface evens. It really depends on the precision of the tongue-and-grove milling of the hardwood.

Another technique is pushing and pulling the sander as it moves. The pressure is strong as it moves forward. You will need to lift the sander at an angle and apply pressure as it moves back. Continue this method until the diagonal scratches are not visible anymore. You must be careful that the traces of the sandpaper are eliminated. The slightest pattern will show after you apply a coating.

The process may take a long time. Be prepared to change the sandpaper form time to time. Stock up on 20, 36, 60, 80, and 100 grit sandpaper. For wood that is coated with aluminum oxide, use a commercially available softening solution before sanding. It may be hard to sand if you do not do this. Sandpaper also contains aluminum oxide so scratching the two surfaces against each other will take more force.

Hardwood Floors provides detailed information on Hardwood Floors, Engineered Hardwood Floors, Solid Hardwood Floors, Long-strip Hardwood Floors and more. Hardwood Floors is affiliated with Install Hardwood Flooring.

Steel Stairs

Building Muscle

Are you trying to add lean muscle mass? Confused by all of the muscle building systems out there? Which system will work the best for you? There is High Intensity, Heavy Duty, Power Partials, Static Contractions, X-Reps, X-Size (different from X-Reps), High Volume, Pyramid, Twenty Rep Squats, Central Nervous System(CNS), my own Quick Hammer Routine, and many, many more to choose from. So, which one should you try? Why not take the best points out of each system and use them all? Obviously, you cannot do some of each of these systems, each and every workout.

What I like to do is take my basic, high intensity routine and add something to the end of the set. Although I really don't use high volume, and I only occasionally play around with X-Size, I like to use parts of these other systems on a regular basis. Again, I start with a normal high intensity routine where I might do one set of one to three exercises for a bodypart. I will then add one, or a combination of more than one of some of these other rep styles to my set. For instance, if I am doing bent rowing, I do as many normal repetitions with a heavy weight as I can.

One I reach failure, I will do as many partials as I can. If this has not completely wiped me out, I will throw in a static hold, or an X-Rep for 5-10 seconds at the end. Static holds are like an Isometric rep. You hold the weight in a contracted position for a few seconds. An X-Rep is much like a Static Rep, except you kind of pulsate the weight as if your contracted muscles are vibrating. Again, I will do one of these reps for about 5-10 seconds. I cannot tell you which of these two hold reps work's best, but they both really do work.

Now, if I am doing the benchpress, I prefer Pyramids over a single set. I feel much safer going up fifty pounds each set to get my mind and my muscles prepared for the heavy benchpress. At the end of my heavy set, I will do a Static Rep for around 10 seconds to really push the pecs. Squats are a bit different because I have a really bad right knee. The only way I will do a Full squat is with a very light weight while warming up. When I start going heavy, I do Only Power Partials.

Again, like the benchpress, I prefer to Pyramid the weight up to get my body ready for the heavy weight. I also rarely do less than twenty reps on squats. Even if I am doing 400lbs, I will do 20 reps. It is amazing about the legs, but no matter how hard you push them, they seem to always finish the set! At the end of the set, I will do a Static Hold for 10-15 seconds. I do Static Holds, or X-Reps on pretty much all of my other exercises including Curls and Triceps Dips.

I purchased Pete Sisco's CNS Workout last year and I will use it from time to time. The idea behind it is to hammer the body in a quick, high intensity way to get a massive response from your central nervous system. I don't use it regularly, but it is a very good system and I use it when I think the time is right. Another routine I like is my Quick Hammer Routine. It is ideal for people who want to build mass, but are very short on time. It work's the major muscles of the body in a brief, ten minute workout. In this case, you pick one exercise for the chest, back and legs. You do the three exercises one after the other in circuit training style, with the exception that you are using heavy weights and lower reps. you perform three cycles of the exercises, wit about a minutes rest between cycles.

If you are going to use this routine for an extended period of time, you can throw in some crunches for the abs. I like doing the routine with dips, bent rows and squats, but you can also use benchpress, chins and leg presses, or any other combination you choose. You just need to make sure you are using compound exercises so you are hitting the other muscles along with your legs, back and chest.

Another thing I will do to add strength, is to do two or three weeks of Static Contraction workouts from time to time. Instead of doing the Static Holds at the end of your set with a weight that you can do a normal repetition with, you use a weight which is actually too heavy for you to perform a full rep with. You really need a power rack or smith machine for these, as you are handling extremely heavy weights and I would not like to depend on someone else to keep this weight off of me. Let's use the benchpress for our example. You set the bar about four to six inches from full extension.

Now, load the weight on the bar. I mean, really load the weight on the bar! I can bench about 330lbs, but at the end of my last Static Contraction cycle, I was doing a ten second static hold with 450lbs! The theory is that you can handle much more weight when you lift in your strongest range of motion. When you lift such an incredibly heavy weight in this range, you incorporate so many more muscle fibres, spurring rapid growth and strength gains. I can personally vouch for the strength gains. I do not have the patience to stick with this system long enough to test the mass gains. I change routines on a regular basis to avoid going stale. The routine I use most of the time is something I picked up from Dorians Yates book, "Blood and Guts", and made my own adjustments to it. I work chest and triceps in one workout, back and biceps in workout two, then Legs and shoulders in workout three.

I will perform crunches every other workout. I work each muscle a maximum of once per week, with the obvious exception of abdominals which get worked one or two times per week.

On Chest day, I pyramid the benchpress for my chest, then perform a hard set of parallel triceps dips to finish off my triceps. On back day, I do a set of deadlifts, a set of bent rowing after a lighter warm-up set, a set of chins and a set of barbell curls.

On leg day, I pyramid squats, usually performing twenty rep sets, a set of military presses and a set of dumbell side laterals.

This routine seem's to work the very best for me. You should experiment to find what work's the best for yourself.

For diet and nutrition, I like a diet that is simple enough for you to stick to for life. If it is too restrictive, you will fall off the wagon and usually go nuts on everything until you have gained back everything you lost and more! Restrictive diets also eat up alot of your valuable lean muscle tissue. What then happen's, is you start out weighing 200lbs with around a 23% bodyfat percentage. When you fall off of your diet, you have catabolized muscle mass with the fat you lost, so when you balloon back up to 200lbs, your bodyfat percentage is now around 26% or more. Now you weigh the same as you did before the diet, but you look worse! Eat smart, train and rest.

I don't recommend low carb diets unless you have alot of weight to lose. Then, I would use it in stages to break away at the fat a bit at a time, while cycling back to a more normal diet of complex carbs, protein and essential fats. Be sure to get a good protein/ carb meal or shake immediately after your training to quickly replenish your muscle protein and energy. Eat five or six small meals per day to get the most nutrients from the food, while storing less of the calories as fat.

Rest is very important for muscle growth. Your muscles do not grow while you are training. They grow while you are at rest. So if you have been training and eating well, and you are not making decent gains, you may not be getting enough rest to allow full recovery of your muscles.

I am a fitness consultant in St. Louis, Mo. I answer training questions via my website at: http://dan4fitness.com

Finding Structural Problems

Tuesday, June 10, 2008

Business Management Skills -Trust Building Tips for Managers

To be successful as a manager it is important to develop a relationship with the team that is based on trust. When employees trust and respect their manager they will give special effort especially when they feel trusted and supported.

Employees rarely excel under the punitive thumb of someone they do not trust and who they feel does not trust them. Without trust productivity suffers as team members play politics, spend time covering themselves and being compliant to dictates that they know are counterproductive. Lack of trust affects morale and customer satisfaction as the employees shift energy and focus from working on real life issues that affect customers to resentment and dissatisfaction towards management.

Effective Communication

Managers who communicate openly and frequently build relationship and trust with the team. They should not make team members guess what theyre thinking but should tell them. Employees can feel that no news is bad news. A lack of interaction erodes trust. Face to face interaction is the best method to build trust.

To get Trust Managers Need to Give Trust

It is important for a manager to create an environment of trust. This begins by trusting others. It is more effective to assume employees are trustworthy unless they prove otherwise rather than waiting to give trust when they havent earned it. As team members come to feel they are trusted by their manager, they will find it easier to trust in return.

Be Honest

Honesty is a very important factor that affects trust. Managers who demonstrate openness about their actions, intentions and vision, soon find that people respond positively to self disclosure and sincerity. As a manager share good and bad news openly. This can eliminate gossip and diffuse inappropriate politics. Great managers know that they are not perfect and they make mistakes. It is better for a manager to admit mistakes rather than ignore them or cover them up. A cover up (perceived or real) is probably the greatest single enemy to trust.

Establish Strong Business Ethics

Managers need to set moral values for the work place. Teams with common ethics are healthier, more productive, adaptable, responsive, and resourceful because they are united under one common value set.

Keep Your Word

Do what you say you will do and make your actions visible. Team members quickly pick up on insincerity and broken promises. Visibly keeping commitments will foster trust. If a manager neglects to make actions visible to the team it can create the impression/perception that they dont follow through.

Keep Interactions Consistent and Predictable

Building trust is a process. Trust results from consistent and predictable interaction over time. If a manager responds differently from week to week it becomes harder to trust him or her.

Set the Tone for the Future from the Beginning

The initial actions of the manager establish norms and expectations. A manager should lead by example.

Be Accessible and Responsive

Find ways to be regularly available to team members. When interacting, be responsive. Unresponsiveness causes unease and distrust. Be action rather than talk oriented. Dont just think about taking action-do it!

Maintain Confidences

Team members need to be able to express concerns, identify problems, share sensitive information, and surface relevant issues. It is important early on to get agreement as to how confidential data will be handled.

Watch your Language

It is important that a managers language does not imply us or them. Terminology should be easy to understand. Leaders should stick with business language and not use strong or vulgar language.

Create Social time for the Team

A lot of trust and confidence is built through informal social interaction. Successful managers ensure that social opportunities happen regularly.

Building trust with employees is critical for creating an effective team that works well together. Taking time to build trust will reap benefits for managers that last a long time.

Barbara White trains and coaches individuals and organizations towards excellence in management and leadership skills More articles about Business Management Skills

Garage Wall Pop Out With Light

Opt In Email List Building Tactics For Continual List Growth

One of the most important elements of any internet entrepreneurs business is their email list of customers and subscribers. If you are not in the process of building an email list now, then you are leaving thousands of dollars of profits on the table. Building an opt in email list of responsive subscribers is mandatory in order to fully optimize the profit gaining potential of your internet business. Therefore, discussed below are a few opt in email list building tactics that will help you to start building your income to the next level.

The first thing that you need to do is study and research your target market. You need to fully gain knowledge about your target audience in order to know how you will locate this market, as well as the type of content you will give them once they are on your email list. If you understand exactly where your target market congregates, what they like and dislike, you can be effective in building your email list as well as extracting major profits from your email list. The major key part of this step is to get an understanding of where to find them, as well as what they need.

Once you know exactly what your target market needs, the next thing that you need to do is create a small report that will slightly address their need. You can easily outsource the creation of this report by going to the various freelance websites out there and submit a project.

The next thing you must do for your opt in email list building campaign is to design a name squeeze page, commonly known as an email opt in landing page. When your visitors land on this page, they only have one option, and that is to sign up. Therefore, in order to get them to sign up, you must provide some good copy on your squeeze page to provoke them to respond in giving you their name and email address.

After you have your squeeze page and report created, you need to begin sending targeted traffic to the squeeze page. Like I stated earlier, if you know where your target market congregates, then you will know where you would need to advertise in order to get them on your email list. A good place to begin is at an online forum or discussion board that is specific to your niche market. Just participate in the forum discussion and provide quality advice as often as you can. Make sure you include the link to your name squeeze page within the signature of your forum posts.

Melvin Perry is an internet marketing coach that specializes in building large email lists within a matter of weeks. He currently teaches marketers via free step by step videos how to earn thousands monthly through the list building model. You can snatch these 2+ hours videos at no cost by visiting FREE Email List Building Videos

Metalframingrestaurants

Monday, June 9, 2008

Would You Like Fries with That? Is Your Graphic Designer Just an Order Taker

Business owners waste thousands of dollars every year on web sites, brochures, sales flyers, etc. that dont work. Sadly, these are often projects that shouldnt have been started in the first place, but no one on their team (or their outsourced graphic designer) advised them it was a bad move. As a result, business owners waste money and eventually become discouraged with taking a proactive approach to attracting new customers marketing. This article focuses on helping you make wiser choices and not wasting time and money when it comes to hiring the right designer for you.

Heres the inside scoop on hired graphic designers that arent experts in marketing (and most of them arent): theyre not involved or concerned in whether the design project makes sense for you, if it will be financially worth it, or what kind of positive results you should expect from the design project. The majority of graphic designers are order takers: you tell them what you want created, and they design it. Now your project may be a success or failure, but regrettably, the artist isnt as much concerned with this - you paid for a design and thats what you received.

As a business owner spending hard earned money, you can see this poses a serious problem. If youre like 95% of business owners out there, you dont know if the marketing design project is going to work for you or not - its a gamble, a crapshoot. Wouldnt it make sense to have someone on your team that can help you select design and marketing projects that will give you the greatest return on your investment rather than an order taker?

Case Study A Real Life Example:
A client and a good friend of mine was solicited by a marketing expert/design firm a few months before we met. My now client was sold a costly marketing plan package that read more like a bad book report than anything of value. Within this report the expert highly recommended the client invest a boat load of money on full color brochures, promotional flyers and coupons, the brochure is marketing collateral that is essentialthe brochure acts as a piece of marketing material that can be left behind to potential customers

As I read these would you like fries with that recommendations, I almost fell out of my chair, Wait a minute! Before we start spending all of this money on design and printing, shouldnt we first analyze how these projects will affect the client?

Before breaking open the piggy bank I suggested that the client take a step back and look at what result these investments will really bring in. Heres what we came up with: these marketing materials are not effective for the business the clients in, the client is a high-end vendor so coupons will not support the high-end image, and the client gets business from personal interaction with prospects (within the 30 seconds a personal connection is made with a prospect). Bottom line here is this: the recommendations would have certainly helped out the marketing/design firm, the grateful client avoided over $5,000 in costs that would have done nothing to grow the business.

Why is this important to avoid order takers?
You dont want to waste money, plain and simple. Unless youre an expert in marketing, and you know what will work and wont work, you have to find someone who can help you understand what design projects are worth investing in and which ones arent.

You wouldnt hire a mechanic that knew less about cars that you, so why would you hire someone to help you get more customers that knows less than you?

Instead of guessing or hoping the project will give you a good return on your investment, wouldnt it be great to know that BEFORE you spend money on it? You make sure your car has enough gas in the tank before you take a trip make sure your next marketing project has enough in its tank to where you want to get to as well.

How can you tell if you have an order taker, and how can you protect yourself?
If you suspect youve hired an order taker, ask her/him these questions. If the questions are not answered to your satisfaction run like heck, and hire an expert who can help you!

  • Can you provide me with any direction or wisdom as to why my project may or may not work for you?


  • What should I be aware of before I have a project like this designed?


  • Can you help me understand how this project is going to be used so I get the best return out of it, and how it should fit into my marketing strategy?


  • How will you evaluate your success on my project: by the results I get or if you designed something visually interesting?


  • Can you provide any past examples of projects that have worked out well for other your other clients? Can you explain why you got the results they did?


  • Are my business growth and financial goals for this project realistic?


  • If you were me, would you invest in this project, WHY or WHY NOT?

Keep in mind, if a designer could really help business owners choose the right projects that yield the highest return on investment, do you think theyd be charging bargain prices or working at a quick copy place? No. Discount designers are always an option but you do get what you pay for an order taker.


Business owners would probably pay someone good money who could help them invest in effective projects rather than waste money. So you have to ask yourself, if a designer is charging bargain prices, whats the likelihood she/he will be an expert versus an order taker?

A business savvy graphic designer is often a contradiction in terms; however, Jeremy is a unique combination of sharp business marketer and creative designer. This one-two punch provides clients with targeted marketing, advertising and design projects that yield outstanding results and a terrific return on their investment; they actually work. Companies looking to feel more confident and credible with their business brand, tired of getting lost in a crowd of competitors and always feeling like they have to compete on price, need to call Jeremy at 480.391.0704.

If you are looking for more free insight and inspiration, youll want to get in on the Can-Do Confidence Builder. Emailed weekly, the Confidence Builder provides you with essential marketing and design insights that help you get the most out of your investment and help you to stay one step ahead of the competition. Email Jeremy at comments@candographics.com and asked to be added to our list or visit www.candographics.com.

Framingsquareandstairclips

Foundation Repair Contractors

If your house or any part of your property experiences foundation failure, it is not a job you want to correct yourself. In order to do this properly you would have to be extensively trained and have a fast knowledge on the subject. This is not your everyday fixer upper project. Chances are to get the job done right; you are going to need to hire a professional. If you are like some people, this might make you a little uneasy. After all, how many times have you heard about contractors taking advantage of their customers? Some not so ethical contractors will charge you more than the job is worth. If you are a little uneasy calling in a professional, here are some basic guidelines for what to expect from a good foundation repair contractor.

The first thing any foundation repair contractor should do is an initial investigation and then a foundation failure report to some extent. Report will explain how severe the problem is and list the proposed repairs needed. If they are going to have to pier, they much included pier spacing and foundation lines in the reports. This takes some time. It might not be a one visit evaluation. A foundation repair contractor may have to come out, do an investigation and then present you with a formal report at a later time that will detail all the work. If you find a contractor who quotes you a price right then and there, chances are they are not a good one. Also do not be surprised if you are charged a fee for the inspection and the report. Most fees range from a few hundred to almost $1000 dollars. Make sure you ask if that fee will be deducted from the final price of the job once ordered. A qualified and ethical contractor will tell you yes. If they say no...stay away from them

Once the investigation is done and a report is ready, a reliable foundation repair contractor will go through it with you and give you the quoted price. They will also explain that quote and answer any questions you may have. If you are getting quotes by a few foundation repair contractors, bear in mind that the prices should not vary much if they are all doing the same work. This is because the materials should pretty much be the same price for all foundation repairmen. One of the possible reasons for the difference of prices between contractors is the amount of experience they have. A knowledgeable, skillful and experienced contractor might cost a little more money than one who has less experience. Keep this in mind when considering the cheapest contractor. Ask questions about their experience to help ensure you are making the best decision for you, your house and your budget.

Once all the work has been done, you should be given a report that contains all the hydraulic measurements and depths regarding the piers. This report should be saved as it will come in handy if you ever decided to sell you house.

Having foundation failure fixed is a costly project, but by following these guidelines, you will be able to find a foundation repair contractor that you are confident with. Make sure they are one who take pride in their work and are not looking for the quick buck.

For the best network of Foundation Repair Specialists check out http://www.Foundation-Repair.us

Home Help Plans